Input / Output Circuit Diagrams And Output Waveforms - Panasonic WUME-SF4D-4 Instruction Manual

Wiring

2-5-2 Input / Output Circuit Diagrams and Output Waveforms

● Using optical synchronization setting and 5-core cable
When using the 5-core cable, set the synchronization method to optical synchronization.
For the setting of optical synchronization, refer to "3-9 DIP Switch Settings."
<Using PNP output>
Emitter
6.8kΩ
0.1μF
6.8kΩ
Internal circuit
Receiver
Internal circuit
*S1
Switch S1
● Test input
Vs to Vs − 2.5V (sink current 5mA or less): Emission halt, Open: Emission (Note)
Note: Vs is the supply voltage.
<Reference>
K1, K2: Safety relay unit, etc.
46
(Brown) +V
(Pink) Test input
470Ω
(Pale blue) Output polarity setting / Lockout release input
(Blue) 0V
Users' circuit
(Brown) +V
(Black) Control output 1 (OSSD 1)
(White) Control output 2 (OSSD 2)
(Pale blue) Output polarity setting /
Lockout release input
(Blue) 0V
Users' circuit
CAUTION
© Panasonic Industrial Devices SUNX Co., Ltd. 2017
+
24V DC
*S1
+20
%
−
-30
+
24V DC
+20
%
−
-30
K1
K2