Panasonic WUME-SF4D-4 Instruction Manual page 150

Options
● Beam Adjustment Mounting Bracket: 4 pcs./set
<MS-SFD-1-5> <MS-SFD-1-6>
● Intermediate supporting bracket: 2 pcs./set
Note: When the number of beam axes is SF4D-F□: 111 or more beam axes, SF4D-H□: 56 or more beam axes,
SF4D-A□: 28 or more beam axes, one set is required.
● No dead-space beam adjustment mounting bracket: 4 pcs./set
● SF4B-G compatible bracket: 4 pcs./set
150
<MS-SFD-1-8>
Model No.
Bracket for support of the middle of the device.
Use when installing the device in a location subject to vibration.
MS-SFB-2
M5 hexagon-socket head bolt: 2 used
Material: Die-cast zinc alloy
Model No.
This is the mounting bracket for reducing the dead space.
Can be mounted on rear or side of device.
M5 hexagon-socket head bolt: 2 used
MS-SFD-3-6
M6 Hex bolt: 2 used
Material: Die-cast zinc alloy
Model No.
Mounting brackets for replacement of a previous SF4B-G<V2> se-
ries model with this model.
No need to change the mounting hole pitch.
Use when installing the device in a location subject to vibration.
MS-SFD-4BG
M5 hexagon-socket head bolt: 2 used
M8 hexagon-socket head bolt: 1 used
Material: SPCC
Model No.
M5 hexagon-socket
head bolt: 2 used
MS-SFD-1-5 or
M8 hexagon-socket
head bolt: 1 used
M6 hexagon-socket
MS-SFD-1-6
head bolt: 1 used
M8 hexagon-socket
MS-SFD-1-8
head bolt: 1 used
Remarks
Remarks
Remarks
© Panasonic Industrial Devices SUNX Co., Ltd. 2017
Remarks
Can be mounted
on rear or side of
device.
Material: SPCC