Panasonic WUME-SF4D-4 Instruction Manual page 15

<Emitter>
Emits light toward the facing receiver. The status of the emitter is indicated by the indicators.
<Receiver>
Receives light from the facing emitter. The control output (OSSD 1 / 2) turns ON when light from
the emitter is received on all beam channels, and turns OFF when light is blocked on one or
more beam channels. [Except when the muting function or blanking function (Note) is used.]
The status of the receiver is indicated by the indicators.
Note: Blanking function settings are configured using the communication module SF4D-TM1 (option) and Con-
figurator Light Curtain software.
Please purchase the SF4D-TM1 communication module separately. The Configurator Light Curtain soft-
ware can be downloaded free-of-charge from our website (panasonic.net/id/pidsx/global).
<Beam channels>
Light emitting elements are arranged in the emitter and light receiving elements are arranged in
the receiver at intervals of 10mm (SF4D-F□), 20mm (SF4D-H□), or 40mm (SF4D-A□).
<Indicators>
Emitter:
Light emission intensity control indicator
Receiver:
Function setting indicator
© Panasonic Industrial Devices SUNX Co., Ltd. 2017
Upper application indicator
Lower application indicator
Emitter: Test indicator
Receiver: Interlock indicator
Emitter: Operation indicator
Receiver: OSSD indicator
Part Description
Upper application
indicator
Lower application
indicator
Stable light
reception indicator
Digital indicator
Frequency indicator
15