Ram/Rom Operation; Transmission Of The Project - Panasonic AFP7PSA1 User Manual

Operation

5.2 RAM/ROM Operation

5.2.1 Transmission of the Project

Set the mode switch to "PROG". Check that the card operation switch is set to "ROM", and
subsequently power on the unit.
 Switch setting conditions
Switch
Mode switch
Card operation switch
 Procedure
1. Set the mode switch to PROG.
2. Set the card operation switch to ROM.
3. Power on the unit.
4. Download the project from the PC to FP7.
The downloaded data is saved in the built-in RAM, and is also automatically saved in
the ROM.
5-4
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Setting
PROG.
ROM