T He Reset / Enc Rypt Butto N; Reset/Encrypt Button Overview; Adding Devices To A Powerline Network - ZyXEL Communications PLA5236 User Manual

T he RESET / ENC RYPT Butto n

Use the
RESET / ENC RYPT
powerline devices.
2.1 RESET / ENC RYPT Butto n O ve rvie w
The
RESET / ENC RYPT
compliant powerline devices which also support the ENCRYPT feature. No other powerline setting
changes are required to connect.
You can use the
• set up a new powerline network.
• separate an existing powerline network into multiple networks.
• reset the PLA to the factory defaults.
2.2 Adding De vic e s to a Po we rline Ne two rk
You can connect a number of PLAs on a powerline network, but you can use the
on only two PLAs at a time.
Place a powerline device close to another powerline device so you have time to set up each one. After
you set up the first powerline device, you have 120 seconds to set up the second powerline device.
Note: Your PLA must be connected to a networking equipment for the
to work. Refer to
Follow the steps below to set up your HomePlug AV Network:
button to automatically set up a secure powerline connection between your
button allows you to set up a secure powerline connection with other HomePlug AV
button to:
RESET / ENC RYPT
Section 1.3 on page 9
PLA5236 User's Guide
C
HA PTER
for more details.
12
2
button
RESET / ENC RYPT
button
RESET / ENC RYPT