Table of Contents
Advertisement
11.7 C o nfig ura tio n Ba c kup/ Re sto re Sc re e n
Backup configuration allows you to back up (save) the PLA's current configuration to a file on your
computer. Once your PLA is configured and functioning properly, it is highly recommended that you
back up your configuration file before making configuration changes. The backup configuration file will
be useful in case you need to return to your previous settings.
Restore configuration allows you to upload a new or previously saved configuration file from your
computer to your PLA.
Click
Ma inte na nc e > Ba c kup/ Re sto re
and restoring configuration appears as shown next.
Maintenance > Backup/Restore
Fig ure 40
The following table describes the labels in this screen.
Table 30 Maintenance > Backup/Restore
L ABEL
Backup
File Path
Browse...
Upload
Reset
Chapter 11 Maintenance
. Information related to factory defaults, backup configuration,
DESC RIPT IO N
Click
to save the PLA's current configuration to your computer.
Ba c kup
Type in the location of the file you want to upload in this field or click
Click
to find the file you want to upload. Remember that you must decompress
Bro wse ...
compressed (.ZIP) files before you can upload them.
Click
to begin the upload process.
Uplo a d
Note: Do not turn off the PLA while configuration file upload is in progress.
After you click
, you must then wait one minute before logging into the PLA again. The
Uplo a d
PLA automatically restarts in this time causing a temporary network disconnect.
Pressing the
button in this section clears all user-entered configuration information and
Re se t
returns the PLA to its factory defaults.
You can also press the
RESET
Refer to the chapter about introducing the Web Configurator for more information on the
button.
PLA5236 User's Guide
button on the rear panel to reset the factory defaults of your PLA.
61
to find it.
Bro wse ...
RESET
Advertisement
Table of Contents
