Simulation Tools - AuCom EMX3-1600C User Manual

BASIC SETUP
4.3

Simulation Tools

Software simulation functions let you test the soft starter's operation and control circuits without connecting the soft starter to mains
voltage.
The run simulation simulates a motor starting, running and stopping to confirm that the soft starter and associated
•
equipment have been installed correctly. Refer to
• The protection simulation simulates activation of each protection mechanism to confirm that the soft starter and
associated control circuits are responding correctly. Refer to
• The output signal simulation simulates output signalling to confirm that outputs and associated control circuits are
operating correctly. Refer to
The simulations are only available when the soft starter is in Ready state, control voltage is available and the keypad is active.
NOTE
Access to the simulation tools is protected by the security access code.
The default access code is 0000.
8
| User Manual (710-04840-00M)
Run Simulation
Output Signal Simulation
on page 28 for details.
on page 27 for details.
Protection Simulation
on page 27 for details.