Accessories - AuCom EMX3-1600C User Manual

APPENDIX

13.9 Accessories

Communication Interfaces
EMX3 soft starters support network communication via easy-to-install communications interfaces. Each soft starter can support
one communications interface at a time.
Available protocols:
Ethernet (Profinet, Modbus TCP, Ethernet/IP), Profibus, DeviceNet, Modbus RTU, and USB.
Expansion Cards
The EMX3 offers expansion cards for users requiring additional inputs and outputs or advanced functionality. Each EMX3 can
support a maximum of one expansion card.
Input/Output
•
The input/output expansion card provides the following additional inputs and outputs:
2 x digital inputs
•
• 3 x output relays
• 1 x analog input
• 1 x analog output
RTD/Ground Fault
•
The RTD/PT100 and ground fault protection card provides the following additional inputs:
6 x PT100 RTD inputs
•
• 1 x ground fault input
To use ground fault protection a 1000:1, 5 VA current transformer is also required.
Finger Guard Kit
Finger guards may be specified for personnel safety. Finger guards fit over the soft starter terminals to prevent accidental contact
with live terminals. Finger guards provide IP20 protection when correctly installed.
NOTE
Finger guards can be used on soft starter models EMX3-0145B~EMX3-1000B (internally bypassed models only).
Different kits are required for different models.
Keypad Mounting Kit
The keypad mounting kit allows remote mounting of the keypad up to 3 m away from the soft starter. Different kits are available with
two or three metre cables.
PC Software
WinMaster PC software provides monitoring, programming and control of up to 99 soft starters.
A Modbus or USB communication module is required for each starter to use WinMaster.
88
| User Manual (710-04840-00M)