STEP 9. Turn Off the Analyzer
To turn the PNA OFF, BRIEFLY press the front panel On/Standby switch. The PNA will then begin to
shutdown.
Shutdown
The On/Standby indicator changes from green to yellow when power is Off.
The current instrument state is NOT saved to the PNA solid state drive.
When the PNA is powered ON, a full system boot-up is performed and the PNA powers-up in the Preset
settings.
NOTE
Repeatedly doing either of the following two actions may cause damage to the PNA solid state
drive.
1. Only in an emergency should the power cord be removed from the PNA without first being put
in Shutdown mode.
2. If the PNA is locked and you cannot operate the mouse or keypad, turn OFF the PNA by
pressing and holding the power button for at least four seconds.
14