Step 7. Perform Administrative Tasks; Step 8. Run The Operator's Check - Agilent Technologies PNA series Installation And Quick Start Manual

2. Turn the analyzer on by pressing the front panel On/Standby switch.
CAUTION Do NOT press keys on the front panel, rotate the RPG knob, or connect a USB device
during boot up of Windows or of the PNA application program. Doing so may lead to a
front panel lockup state.
NOTE This product contains a Windows operating system. The Network Analyzer application is
supported and qualified only with the version of Windows that was installed when shipped.

STEP 7. Perform Administrative Tasks

We recommend that you consider performing the following administrative tasks shortly after powering
up the analyzer for the first time.

Set up the administrator password only if required for your location. The PNA already has a
default password.

Set the time, date, and time zone (if needed)
NOTE Do NOT create additional User Accounts until you have read the PNA Help file topic: "PNA
User Accounts and Passwords" which states why and how this should be done.
Procedures for the above tasks are in the Help system in the analyzer. To view these procedures:

On the analyzer's front panel, press the Help button. Or, on the PNA display, click Help,
Network Analyzer Help.

Click Quick Start in PNA Help.

Click Perform Administrative Tasks.

Click the task you wish to perform.

STEP 8. Run the Operator's Check

The operator's check should be performed when you first receive your analyzer, and any time you wish
to have confidence that the analyzer is working properly. The operator's check does not verify
performance to specifications, but should give you a high degree of confidence that the instrument is
performing properly. The only equipment required is an open or short that mates with the front panel
test ports. The open or short is NOT included with the PNA.

Press System, then [Service] softkey, then [Operator's Check]. Follow the prompts.

For assistance, use the Help button displayed on the screen of the Operator's Check.
13