Step 4. Connect The Accessories - Agilent Technologies PNA series Installation And Quick Start Manual

To Install in an Equipment Rack
(Option 1CP - Rack Mounting For Instruments Equipped With Handles)
(Option 1CM - Rack Mounting For Instruments Not Equipped With Handles)
When you install the analyzer in an equipment rack, you must install rails in the rack to support the
weight of the analyzer. Attach either the Option 1CP or Option 1CM rack mount flanges to the analyzer.
Secure the analyzer to the equipment rack. Replace the analyzer bottom plastic feet with the hole plugs
provided.
For installation, follow the instructions provided with the rack mount kit and the rail kit.

STEP 4. Connect the Accessories

USB devices can be connected to any available USB port. All ports comply with USB 2.0 specifications.
The PNA will recognize the USB device when it is connected and run the appropriate software driver to
make the device operate correctly. However, there is a limit to the amount of current that the PNA USB
ports can provide. See PNA Help - "USB port specifications" (index entry) for more information.
The following is a list of USB devices commonly used with the PNA. Refer to the Help that is embedded
in the PNA for more information.

Mouse — standard

Keyboard — standard

Printer (separate product)

USB flash drive (separate product)

ECal module (separate product)
NOTE Consider ergonomics when locating the mouse and keyboard.
NOTE Do NOT connect an ECal module to the USB until after the PNA is started. Once the PNA is
started, press the front panel Help button to learn about 'Connecting an ECal module for the
first time'.
11