Switch On Receiver; Upgrade Of The Receiver Software - SMART CX72 User Manual

5.1 Switch on Receiver

1. Switch on all connected devices.
2. Ensure that the correct AV input is selected at the TV set (i.e. that the
signals from the receiver are displayed).
3. Ensure that the correct audio input is selected at the connected home
cinema or hi-fi system.
4. Switch on the receiver by using the power switch (on the rear panel of
housing) (I, ON).

5.2 Upgrade of the Receiver Software

1. Search for the upgrade file on the internet page www.smart-
electronic.de (menu item Support) and save it to a USB data storage.
2. Unpack the file with the ending .abs and copy it to the USA data stor-
age.

3. Connect the data storage to your receiver.
4. In the menu Tools, select the submenu Upgrade by USB and press
the OK key.
5. At Upgrade Mode, select the upgrade mode Allcode by using the
keys and
6. At Upgrade File, select the file copied in step 2.
7. Select the Start button and
confirm by pressing OK.
The message on the right will
be displayed:
The upgrade will be performed after selecting
and and pressing OK. Then, the receiver will automatically perform
new start.
smart CX72
Please note that the upgrade file (*.abs) is copied direct-
ly to the root directory of the USB data storage (no
subdirectory)!
.
Basic Operation
OK
by using the keys
19