System Settings - SMART MX52 User Manual

6.3.2 TV
In the line Display Mode you can set the video signal type with the
buttons. PAL is the TV standard in Europe.
In the line Aspect Ratio you can set the aspect ratio of the television image
which is displayed with the
In the line Video Output you can set the video standard of the SCART connector
buttons. RGB is the TV-Standard.
with the and
In the line Display Mode you can set the video signal type with the
buttons. PAL is the TV-Standard in Europe.
In the lines Brightness, Contrast, Color and Saturation you can influence the
color representation of the television image.
 Exit the menu with OK.
6.3.3

System settings

In the line Set up EQ you can adapt the sound reproduction with
buttons.
In the line Surround you can set whether a surround signal should be produced
via the digital audio output with the
In the line Antenna +5V you can set whether your antenna should be supplied
with 5V voltage with the
which does not require a voltage supply can be damaged or destroyed!
In the line Country you can set which channel list your receiver should display
with the and buttons.
In the line Child Protection you can activate/deactivate the child protection with
the and buttons.
smart MX52
and buttons.
Letter Box (LB) means that the width of the TV images (e.g.
movies) has been reduced so that they fit on the screen
without any distortions. For this reason, black bars are
displayed on the upper and lower edge of the image.
Pan & Scan (PS) means that the width of the TV-images (e.g.
movies) is trimmed left and right so that they can be displayed
on a 4:3 television without the black bars.
and
and buttons. Careful with this function: an antenna
buttons.
Settings
and
and
and
45