Transport And Shutdown; Troubleshooting - SMART MX52 User Manual

 Clean the casing of the receiver with a dry cloth.

11 Transport and Shutdown

 Disconnect the receiver and all connected devices from the power supply.
 Pull out all connected cables.
 Remove the batteries from the remote control.
 Place the receiver, cable and remote control into the original packaging.
 Store the receiver and the accessories in a dry and dust-free area.
 Protect the receiver against frost.

12 Troubleshooting

Symptom
No sound or
image, the LED on
the receiver is lit.
No sound or
image.
The TV-device
does not display
an image.
smart MX52
No cleaning agents which contain solvents such as petrol
or thinners should be used.
Possible Causes
The receiver is in standby
mode.
No signal or only a weak
signal.
The system has not been
connected correctly.
The TV-device is not in AV-
mode.
Transport and Shutdown
Attention!
Remedy
Press the POWER button in order
to switch the receiver on.
Check the cable connection to the
receiver and from the receiver to
the other connected devices and
fasten them if necessary.
Check the connection of the
SCART-cable and fasten it if
necessary.
Switch the TV-device to the
respective AV-input.
51