Description - Siemens RUGGEDCOM RSG2488 Installation Manual

Chapter 1
Introduction
• -40 to 85 °C (-40 to 185 °F) operating temperature (fan-less)
• Conformal coated printed circuit boards (optional)
Section 1.2

Description

The RUGGEDCOM RSG2488 features various ports, controls and indicator LEDs on the front panel for connecting,
configuring and troubleshooting the device.
1
4
2
Figure 1: RUGGEDCOM RSG2488
1. Front 2. Rear 3. Power Modules 4. Power Status LEDs 5. RS-232 Serial Console Port (DB9) 6. Management Port 7. Alarm
Indicator LED 8. Access Plate 9. Port Status LEDs 10. Line Modules 11. Power Supply Terminal Block 12. Chassis Ground Terminal
Power Status LEDs
RS-232 Console Port
Management Port
Alarm Indicator LED
Access Plate
Port Status LEDs
2
3
4
10
Indicates the status of the power modules.
LED
I The power module is receiving power
O The power module is supplying power
The serial console port is for interfacing directly with the device and accessing initial
management functions. For information about connecting to the device via the serial
console port, refer to Section 2.9, "Connecting to the
The 10/100Base-T Ethernet management port is for system management that is out-of-band
from the switch fabric. For information about connecting to the device via the 10/100Base-T
Ethernet management port, refer to
The alarm indicator LED illuminates when an alarm condition exists.
The removable access plate provides access to the microSD slot. Use a microSD card to load/
store the firmware and configuration for the device. For information about using a microSD
card, refer to Section 2.8, "Inserting/Removing the MicroSD
Port status indicator LEDs indicate the operational status of each port.
5 6 7
8
Description
Device".
Section 2.9, "Connecting to the
Card".
RUGGEDCOM RSG2488
Installation Guide
9
11
11 12
Device".
Description