Advertisement
( 2 ) Preprogram functions
The unit can be linked together as master/slave in daisy chain in linkage as many
units as required and run by built in preprogrammed chase sequences automatically
or by sound activation.
When linking the Barrel and the Scanner in stand alone mode, the Barrel must be
used as the master head.
Not need to set the dipswitches in master/slave mode.
＊ 2-light show
Dipswitch 10 "off" means the unit works normally and "on" means inversion. In order
to creating a great light show, you can set dip switch 10 "on" on any unit that is linking
to the master unit to get contrast movement to each other, even if you have two units
3D
only. Dipswitch 10 on the first unit is no use in the DMX linking, as it is the master
unit that operates the light show.
( 3 ) By easy controller
The easy remote control is used only in master/slave mode.
By connecting to the 1/4" microphone jack of the first unit (its
DMX input plug is not used), you will find that the remote
control on the first unit will control all the other units for stand
by, shutter and slow/fast function.
Shutter function is only effective while the button is held down.
It has three modes.
1. The first press：synchronous strobe.
2. The second press：two-light show strobe.
3. The third press：gobos and colors strobe at random.
Advertisement
