Specifications; Standards And Approvals - Mira Vier Installation Manual

Standards and Approvals

The Mira Vier complies with all relevant directives for CE marking. The Mira Vier is
a type 1 electronic, independently mounted control for surface mounting.
The Mira Vier is in compliance with the essential requirements of the R&TTE directive
1999/5/EC. A copy of the declaration of conformity may be obtained by contacting
Kohler Mira Limited, U.K customer services department.
General
Pollution Degree
Rated Impulse Voltage
Suitable for Drinking
Connections
Mira Digital Mixer Valve High Pressure (Not suitable for Pumped
Gravity Systems)
Pressures
Maximum Static Pressure
Maximum Maintained Pressure
Minimum Maintained Pressure
Supply Pressure Differential
Temperatures
Maximum Temperature (factory preset)
Maximum Temperature (setting range)
Minimum Temperature
Hot Water Range
Cold Water Range
Temperature Stability
Ambient Temperature
Maximum Relative Humidity
Flow Rates and Times
Nominal Flow Rates (will vary depending
on inlet maintained pressure and spray
mode)
Electrical
Supply Voltage
Maximum Load

SPECIFICATIONS

2
2.5 kV
Not Suitable
15 mm Compression/Pushfit
1000 kPa (10 bar) = 100 m max. total head
500 kPa (5 bar) = 50 m max. total head
50 kPa (0.5 bar) = 5 m max. total head
Nominally Equal
45 °C
35 °C - 48 °C
Thermostatic control down to 30 °C
55 °C - 65 °C
1 °C - 20 °C
± 1 °C at recommended supply conditions
1 °C - 40 °C
95% non-condensing
Max @ 1.0 bar = 16l/min
Min @ 1.0 bar = 5l/min
230V AC 50 Hz
20 W
9
1144486-W2-K