Mira Vier Installation Manual page 24

Drill and plug Slide Bar Assembly
fixing holes.
Insert fixing screws through holes
in Wall Brackets and fix to wall. Do
not fully tighten. Use template to
set correct distances between Wall
Brackets. Fully tighten screws. Use
longer fixing screws if using spacers
supplied.
Note! Slots in Wall Brackets allow for
adjustment. Use one horizontal slot
and one vertical slot.
Make sure that holes for Slide Bar
Securing Screws are positioned
correctly, as shown.
Fit ceiling plate and extension tube.
Note! Extension tube may need to
be shortened, use a hacksaw to
shorten tube. Make sure rough end
is concealed in ceiling.
24
1144486-W2-K