Table of Contents
Advertisement
General
The installation must be carried out in accordance with these instructions, and must
be conducted by designated, qualified and competent personnel.
The Digital Mixer Valve may be installed in a loft space, under the bath or in a
convenient cupboard space provided there is enough room for maintenance
(e.g. Removal of Digital Mixer Valve lid). Failure to do so may result in an
inability to carry out any maintenance. Safe and easy access to the product
should be available at all times.
When installing a mixer valve in an area not regularly accessed, consideration
for potential leaks must be taken into account. While such events are unlikely,
it is advisable to periodically check the installation for traces of water on or
around the product. If possible, site the valve in a location where any leak
would be contained or routed to avoid areas sensitive to water damage.
Isolating valves must be installed to both inlets (supplied) and outlet, close to the
Digital Mixer Valve for ease of maintenance.
Caution! Risk of product damage. The Digital Mixer Valve must be installed in
a dry, ventilated area where it will not freeze.
Important Information Regarding Radio Controlled Devices
•
Metal objects such as steel baths or sinks, cold water storage tanks, hot water
cylinders, foil lined plaster board walls, radiators and even thick brick walls, can
all dramatically reduce the radio operational range of any radio controlled product.
•
Interference from other radio signals can dramatically reduce the ability of the
Vier Wireless Controller / digital mixer to register or communicate. This may
include; mobile phones, radio control boiler thermostats, wireless broadband
routers, radio control toys, cordless phones, remote outdoor weather stations,
wireless doorbells etc.
•
If you encounter difficulty registering the wireless controller and digital mixer
ensure all other radio interference is temporarily switched off.
Note! Failure to follow these guidelines can result in poor, intermittent or complete
failure to communicate with the digital mixer.
Note! Both the Wireless Controller and Digital Mixer contain internal radio
transmission aerials which are directional in operation. In order to achieve optimum
radio signal strength and therefore optimum communication distance It may be
necessary to alter the Wireless Controller and Digital Mixer relative orientation /
position to each other.
1144486-W2-K
INSTALLATION
12
Hide quick links:
Advertisement
Table of Contents
