Safety Testing - Rimage 360i User Manual

Rimage 360i

Safety testing

Product name: Rimage 360i
Model: RAS17
Notice for USA
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
This product complies with UL 60950-1.
Notice for Canada
This Class B digital apparatus complies with Canadian ICES-003 Issue 3:1997. Cet
appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
C
This product complies with CAN/CSA-C22.2 No. 60950-1-03
Notice for Europe
This product is in conformity with the EMC Directive (89/336/EEC) and the Low-Voltage
Directive (73/23/EEC) through compliance with the following European standards:
EN 55022: 1998 + Amd 1: 2000 Class B Limit; EN 55024: 1998; EN 61000-3-2:2000;
EN 61000-3-3:1995 + Amd 1: 2001; EN 60950: 2000. The CE mark has been affixed in
accordance with the CE Marking Directive 93/68/EEC.
Notice for Japan
This product complies with VCCI V.3/2004.04
20 110808_C