Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 513

7750 SR OS Interface Configuration Guide
Label
Hold time up
Hold time down
IfIndex
Phy Link
Configured Mode
Network Qos Pol
Encap Type
Active Alarms
Auto-negotiate
Alarm State
Collect Stats
Down-When-Looped
Egress Buf (Acc)
Egress Buf (Net)
Ingress Buf
(Acc)
Description (Continued)
The link up dampening time in seconds. The port link dampening timer
value which reduces the number of link transitions reported to upper
layer protocols.
The link down dampening time in seconds. The down timer controls
the dampening timer for link down transitions.
Displays the interface's index number which reflects its initialization
sequence.
Yes — A physical link is present.
— A physical link is not present.
No
network — The port is configured for transport network use.
access — The port is configured for service access.
The network QoS policy ID applied to the port.
Null — Ingress frames will not use any tags or labels to delineate a
service.
dot1q — Ingress frames carry 802.1Q tags where each tag signifies
a different service.
The number of alarms outstanding on this port.
True — The link attempts to automatically negotiate the link speed
and duplex parameters.
False — The duplex and speed values are used for the link.
The current alarm state of the port.
Enabled — The collection of accounting and statistical data for the
network Ethernet port is enabled. When applying accounting policies
the data by default will be collected in the appropriate records and
written to the designated billing file.
Disabled — Collection is disabled. Statistics are still accumulated
by the IOM cards, however, the CPU will not obtain the results and
write them to the billing file.
Shows whether the feature is enabled or disabled.
The access-buffer policy for the egress buffer.
The network-buffer policy for the egress buffer.
The access-buffer policy for the ingress buffer.
Interface Configuration
Page 513