Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 300

Configuration Commands
config>port>tdm>ds1>channel-group
config>port>tdm>e1>channel-group
config>port>tdm>e3
Description
This command applies egress scheduler overrides. When a port scheduler is associated with an egress
port, it is possible to override the following parameters:
See the 7750 SR OS Quality of Service Guide for command syntax and usage for the port-
scheduler-policy command.
The no form of this command removes all override parameters from the egress port or channel
scheduler context. Once removed, the port scheduler reverts all rate parameters back to the
parameters defined on the port-scheduler-policy associated with the port.
level
Syntax level priority-level rate pir-rate [cir cir-rate]
no level priority-level
Context config>port>ethernet>egress-scheduler-override
config>port>sonet-sdh>path>egress-scheduler-override
config>port>tdm>ds3>egress-scheduler-override
config>port>tdm>ds1>channel-group>egress-scheduler-override
config>port>tdm>e3
Description
This command overrides the maximum and CIR rate parameters for a specific priority level on the
port or channel's port scheduler instance. When the level command is executed for a priority level,
the corresponding priority level command in the port-scheduler-policy associated with the port is
ignored.
The override level command supports the keyword max for the rate and cir parameter.
When executing the level override command, at least the rate or cir keywords and associated
parameters must be specified for the command to succeed.
The no form of this command removes the local port priority level rate overrides. Once removed, the
port priority level will use the port scheduler policies level command for that priority level.
Parameters priority-level — Identifies which of the eight port priority levels are being overridden.
rate pir-rate — Overrides the port scheduler policy's maximum level rate and requires either the
cir cir-rate — Overrides the port scheduler policy's within-cir level rate and requires either the max
Page 300
• The max-rate allowed for the scheduler.
• The maximum rate for each priority level 8 through 1.
• The CIR associated with each priority level 8 through 1.
Values
1 — 8
max keyword or a rate defined in kilobits-per-second to follow.
Values
1 — 40000000, max
keyword or a rate defined in kilobits-per-second to follow.
Values 0— 40000000, max
7750 SR OS Interface Configuration Guide