Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 392

Configuration Commands
Description This command enables the context to configure the egress QoS profile for an MLFR bundle or a
Frame Relay port with FRF.12 UNI/NNI fragmentation enabled.
qos-profile
Syntax qos-profile profile-id
no qos-profile
Context config>port>tdm>channel-group>frame-relay>egress
config>port>sonet-sdh>path>frame-relay>egress
Description This command specifies the ingress or egress QoS profile to be used for the configuration of the
egress QoS parameters of a Frame Relay port with FRF.12 UNI/NNI fragmentation enabled.
The no form of the command removes the parameters from the configuration.
Parameters
profile-id — Specifies the profile number. The value can only be modified if the FR port is shut
fragment-threshold
Syntax fragment-threshold fragment-threshold
no fragment-threshold
Context config>port>tdm>channel-group>frame-relay>frf.12
config>port>sonet-sdh>path>frame-relay>frf.12
Description This command sets the maximum length in bytes of a fragment transmitted across a frame relay port
with the FRF.12 UNI/NNI fragmentation enabled.
The no form of this command resets the fragment threshold back to the default value.
Default
128
Parameters fragment-threshold — Specifies the maximum fragment length, in bytes, to be transmitted across the
identifier
Syntax [no] identifier frf16-link-id-string
Context config>port>tdm>ds1>channel-group>frame-relay
Description
This command defines the identifier for the FR bundle when used in an MLFR bundle. The no form
of this command resets the value to null.
Page 392
down.
Values
1-128
FRF.12 port.
Values
128-512 bytes
7750 SR OS Interface Configuration Guide