Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 512

Show Commands
Page 512
Label
Transceiver Type
Model Number
Transceiver Code
Laser Wavelength
Connector Code
Diag Capable
Vendor OUI
Manufacture date
Media
Serial Number
Part Number
Input/Output
Description
Interface
Speed
Link-level
MTU
Admin State
Oper State
Duplex
Description (Continued)
Type of the transceiver.
The model number of the transceiver.
The code for the transmission media.
The light wavelength transmitted by the transceiver's laser.
The vendor organizationally unique identifier field (OUI)
contains the IEEE company identifier for the vendor.
Indicates if the transceiver is capable of doing diagnostics.
The vendor-specific identifier field (OUI) contains the IEEE company
identifier for the vendor.
The manufacturing date of the hardware component in the mmddyyyy
ASCII format.
The media supported for the SFP.
The vendor serial number of the hardware component.
The vendor part number contains ASCII characters, defining the ven-
dor part number or product name.
When the collection of accounting and statistical data is enabled, then
octet, packet, and error statistics are displayed.
A text description of the port.
The port ID displayed in the slot/mda/port format.
The speed of the interface
Ethernet — The port is configured as Ethernet.
SONET — The port is configured as SONET-SDH
The size of the largest packet which can be sent/received on the Ether-
net physical interface, specified in octets.
Up — The port is administratively up.
Down — The port is administratively down.
Up — The port is operationally up.
Down — The port is operationally down.
Full — The link is set to full duplex mode.
Half — The link is set to half duplex mode.
7750 SR OS Interface Configuration Guide