Names And Functions Of Parts - Panasonic AFP7X16DW User Manual

Unit Common Specifications

1.1 Names and Functions of Parts

(8)
8
(1)
1
(2)
2
(1) I/O indicator LEDs
Indicates the ON/OFF status of the input and output.
(2) Terminal block release lever
Lowering this lever makes it possible to dismount the terminal block from the unit without
disconnecting the wiring. Push the lock button on the bottom of the unit to lock the release
leaver after the terminal block is installed.
(3) DIN hook
This hook is used to mount the unit onto the DIN rail.
(4) Unit Connector
This connector is used to connect the internal circuits of two or more units.
(5) Terminal block
Connect power supplies for the purpose of operating and driving I/O circuits. Crimp terminals
for M3 can be used.
(6) Connector (40P)
Connect power supplies for the purpose of operating and driving I/O circuits. Connectors for
wire-pressed terminal cable or flat cable connectors can be used.
(7) Indicator selection switch
Use this switch to select the 32 points in the first half or the 32 points in the second half to be
displayed by the I/O indicator LEDs.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
1-2
(8)
8
(1)
1
(5) 5
(4) 4
(3)
3
(8)
8
(1)
1
6
(6)
4
(4)
(3)
3
(7)
7
(6)
6
(4) 4
(3)
3