Weller WQB 4000SOPS Quick Starter Manual page 8

WQB 4000SOPS - Quick Starter Guide
Loading nozzle parameters or profiles
From software version 2.17
Version 1.2.6
● Start desoldering
● Desolder component, profile and write
● Clean pc board
● Open tab
Placement
new component and align manually.
Correct the component size if
necessary with the height adjustment,
define Z-axis stop.
● Save profile under the desired file
name. The settings will also be saved
in this profile for subsequent use.
and insert
Page 8 of 8