Download Print this page

Firmware Update; Assembly / Installation Instructions - Weller WQB 4000SOPS Quick Starter Manual

Hide thumbs Also See for WQB 4000SOPS:

WQB 4000SOPS - Quick Starter Guide

STEP 3 DirectX 9.29 Redist Follow the instructions.

STEP 4 WQB4000 Software Follow the instructions.

Firmware Update

The installation of the firmware updater is not necessary for correct operation of the

device; installation of this software is therefore only recommended if required.

2.3

2.3 a

Required table area 1030 X 630 X 650 cm for a load of approx. 40 Kg

2.3.b

Place the device in the middle of the table

2.3.c

Set the adjustable feet with the air level so that the device is horizontal and does

not wobble.

From software version 2.17

Install DirectX 9.29 even if a higher version

of DirectX (10/11) is installed

Restart your PC after installation

Change the Settings of the CPU idle states

Start "IDS Camera Manager.exe"

Press "Additional functions" button

Disable the CPU idle states (Hook in box).

Close the window

Version 1.2.6

Page 2 of 8