WQB 4000SOPS - Quick Starter Guide
Loading nozzle parameters or profiles
Soldering
From software version 2.17
Special Function
Version 1.2.6
Load
Open
Library
Run Mode
When the software is started, the last
profile used is opened up.
1. Loading existing profile
Open desired directory
-
leaded
lead-free
-
-
Loading profile
2. Creating new profile
3.
Select application
Activate Special Function
Creating new profile
Select desired nozzle size
(nozzle 27 x 27)
OK
Gradient (default
on/off
Activate Automatic Teach-In
Define Teach-in temperatures
in the individual steps
Place sensors and define
Teach-in sensor
2K/sec)
Page 7 of 8