Weller WQB 4000SOPS Quick Starter Manual page 4

WQB 4000SOPS - Quick Starter Guide
3.2 USB ports
Important!
The WQB 4000SOPS only operates reliably with the shielded USB cables
included in the accessories.
connect directly with a USB 2.0 - full powered – interface
Camera:
WQB4000 : connect directly with a USB 2.0 - full powered interface
3.2.1 Initial operation of the software
 Switch on the WQB 4000SOPS
 PC ► START ► Programs ► Cooper Tools ► WQB40000SOPSControl
 The device starts with default settings
 The soldering head must be raised and the split optical unit must be at the right-hand
stop.
 The reference run for table and insertion head is started with the "GO" command.
This procedure is necessary every time the device is restarted!
From software version 2.17
Version 1.2.6 Page 4 of 8