Mezzanine Connector Definitions - HPE Synergy 480 Gen10 series Maintenance And Service Manual

Position
S5*
S6*
S7
S8
S9*
S10
S11
S12
*You can access the redundant ROM by setting S1, S5, and S6 to On. Switch S9 must be set to On for GPU
expansion options.

Mezzanine connector definitions

Item Connector identification
1 Mezzanine connector 1 (M1)*
2 Mezzanine connector 2 (M2)**
3 Mezzanine connector 3 (M3)
NOTE:
Hewlett Packard Enterprise recommends that you install P416ie-m on mezzanine 1.
* When an NVIDIA Tesla M6 GPU FIO Adapter for HPE Synergy 480 Gen10 compute module is installed in
mezzanine connector 1, mezzanine connector 2 is not available for additional mezzanine cards.
Default Function
Off
Off = Power-on password is enabled.
On = Power-on password is disabled.
Off
Off = No function
On = Reset configuration
Off Reserved
Off Reserved
Off Reserved
Off Reserved
Off Reserved
Off Reserved
Supported card types
Type C and Type D
Type C and Type D
Type C only
Fabric Supported ICM bays
1 ICM 1 and 4
2 ICM 2 and 5
3 ICM 3 and 6
Mezzanine connector definitions 67