Serial Label Pull Tab Information; Drive Numbering - HPE Synergy 480 Gen10 series Maintenance And Service Manual

Item Description
5 Compute module handle release latch
6 Compute module handle
1
If uFF drives (the SFF Flash Storage Adapter) are installed in the drive bays, the drive bay numbering is different. For
more information, see

Serial label pull tab information

The serial label pull tab is located on the front panel of the compute module. To locate the serial label pull tab,
see Front panel components. The serial label pull tab provides the following information:
• Product serial number
• HPE iLO information
• QR code that points to mobile-friendly documentation

Drive numbering

Depending on the configuration, this compute module can support hard drives, SSDs, NVMe drives, and uFF
drives (supported in dual SFF flash adapters) in the drive bays. Depending on the device installed, the bay
number might be different.
Item
1
2
Drive numbering
.
Hard drive/SSD bay
numbering
1
2
uFF drive bay
numbering
1 and 101
2 and 102
Serial label pull tab information
NVMe drive bay
numbering
1
2
61