Hot-Plug Drive Led Definitions - HPE Synergy 480 Gen10 series Maintenance And Service Manual

Hot-plug drive LED definitions

Item LED
1 Locate
2 Activity
ring
3 Do not
remove
4 Drive
status
62 Hot-plug drive LED definitions
Status Definition
Solid blue The drive is being identified by a host application.
Flashing blue The drive carrier firmware is being updated or requires an update.
Rotating green Drive activity
Off No drive activity
Solid white Do not remove the drive. Removing the drive causes one or more of
the logical drives to fail.
Off Removing the drive does not cause a logical drive to fail.
Solid green The drive is a member of one or more logical drives.
Flashing green The drive is doing one of the following:
• Rebuilding
• Performing a RAID migration
• Performing a strip size migration
• Performing a capacity expansion
• Performing a logical drive extension
• Erasing
• Spare part activation
Flashing amber/ The drive is a member of one or more logical drives and predicts the
green drive will fail.
Flashing amber The drive is not configured and predicts the drive will fail.
Solid amber The drive has failed.
Off The drive is not configured by a RAID controller or a spare drive.