Removing And Replacing The Front Panel/Drive Cage Assembly; Removing And Replacing A Mezzanine Option Card - HPE Synergy 480 Gen10 series Maintenance And Service Manual

Removing and replacing the front panel/drive cage assembly

Procedure
1. Power down the compute module.
2. Remove the compute module.
3. Place the compute module on a flat, level work surface.
4. Remove the access panel.
5. Remove all drives.
6. Remove the front panel/drive cage assembly.
To replace the component, reverse the removal procedure.

Removing and replacing a mezzanine option card

Procedure
1. Power down the compute module.
2. Remove the compute module.
3. Place the compute module on a flat, level work surface.
4. Remove the access panel.
5. Remove the mezzanine option card.
Removing and replacing the front panel/drive cage assembly 37