Table of Contents
Advertisement
CAUTION:
To prevent damage to electrical components, properly ground the compute module before beginning
any installation procedure. Improper grounding can cause ESD.
Installing the compute module
Prerequisites
Procedure
1. Verify that the device bay is configured for a half-height compute module. For more information, see the
setup and installation guide for the frame on the Hewlett Packard Enterprise website.
2. Remove the compute module end cap.
3. Prepare the compute module for installation by opening the compute module handle
4. Install the compute module. Press the compute module handle near the release button to completely close
the handle.
Installing the compute module
31
Advertisement
Table of Contents
Troubleshooting
