Micro atx motherboard supports 22nm lga1155 intel core i7/i5/i3 cpu with intel q77, ddr3, three independent dis plays via dual hdmi/dvi-i, dual intel pcie gbe, usb 3.0, sata 6gb/s , ten serial ports , hd audio and rohs (212 pages)
Atx motherboard supports lga775 intel core 2 duo/quad cpu with 1333/1066/800mhz fsb, ddr3, dual pcie gbe, isa, pci, pcie x16, 6com, lpt, sata ii, ide, usb 2.0, audio and rohs (12 pages)
Atx motherboard with intel core 2 duo processor intel 3010&ich7r supports ecc, dual pcie x8, dual intel pcie gbe, vga, 4 sata ii with raid and audio (8 pages)
Micro-atx lga1155 motherboard for intel i7/i5 quad core or i3 dual core cpu, intel q67, ddr3, vga/dvi-d/hdmi dual intel pcie gbe, two usb 3.0 ports, ten com ports two sata 6gb/s ports, hd audio and rohs (184 pages)
Atx motherboard supports 8th/9th gen. 14nm lga1151 intel core i9/i7/i3, celeron and pentium processor, ddr4, triple independent displays, dual gbe lan, m.2, usb 3.2 gen 2 (10gb/s), sata 6gb/s, hd audio and rohs (163 pages)
3 x SATA II 1 x CF Type II Slot Display Interface : CRT/VGA integrated in Intel® GME965/GLE960 (Intel® GMA X3100) Expansions : 1 x PCI Slot 1 x PCIe x16 Signal to Golden finger (for ISP-9652 Only) Super I/O : ITE IT8718F...
Dimensions : 220mm x 244mm Weight : GW: 1000g / NW: 450 g Ordering Information ISP-9652-R10 : Socket P Intel® Core™2 Duo MB, GME965 with 800MHz FSB, VGA, CF, 6 Intel® GbE Lan with Dual group Lan-Bypass function, USB2.0, SATAII,...
Page 4
Jumpers setting and Connectors LABEL FUNCTION J_CMOS1 Clear CMOS jumper USB_C01 External USB Connector USB23 USB45 Internal USB Connectors USB67 USB68 COM1 External Serial Port DB-9 Connector COM2 Internal Serial Port Connector VGA1 On Board VGA DB-15 Connector LAN1 LAN2 LAN Connectors with Bypass Function LAN3 LAN4...
Page 5
J_CMOS1: Clear CMOS Jumper DESCRIPTION Normal Operation (default) Clear CMOS Setup JSPI2: Flash BIOS/EC FW SPI ROM Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION +3.3V CS0# USB23,USB45,USB67,USB68: Internal USB Connectors DESCRIPTION DESCRIPTION VCC(+5V) DATA- DATA+ DATA+ DATA- VCC(+5V) COM2 : Internal Serial Port Connector (RS-232) DESCRIPTION DESCRIPTION...
Page 6
CPU12V1:+12V CPU Power Input Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION +12V +12V CPU_FAN1,SYS_FAN1: FAN Connectors BAT1 : DESCRIPTION Battery Connector PIN DESCRIPTION +12V BAT+ (+3.3V) Rotation Signal BAT- (GND) Control F_PANEL1 : PWR 、 RST Buttons 、 Indicators and Speaker PIN DESCRIPTION PIN DESCRIPTION Power LED+ Speaker+...
Page 8
JEC_SET1: EC Function Setting Connector ACK Count JEC_SET1 JEC_SET1 JEC_SET1 JEC_SET1 (9 – 10) (11 – 12) (13 – 14) (15 – 16) 1 Second Open(Low) Open(Low) Open(Low) Open(Low) 2 Second Open(Low) Open(Low) Open(Low) Short(Hi) 3 Second Open(Low) Open(Low) Short(Hi) Open(Low) 4 Second Open(Low)
Page 9
LAN Connectors & Bypass Function • LAN Bypass Definition LAN Bypass feature removes a single point of failure so that essential business communication can continue while a network failure is diagnosed and resolved. In the event of a power, hardware or software failure, Hardware Bypass will automatically activate, allowing network traffic to continue.