IEI Technology IMB-ADL-Q670 User Manual
  1. Manuals
  2. Brands
  3. IEI Technology Manuals
  4. Motherboard
  5. IMB-ADL-Q670
  6. User manual

IEI Technology IMB-ADL-Q670 User Manual

Microatx motherboard supports lga1700 12th/13th generation intel core i9/i7/i5/i3, pentium and celeron processor, triple independent display, dual 2.5gbe lan, m.2, ddr4, usb 3.2, sata 6gb/s, hd audio and rohs
Hide thumbs Also See for IMB-ADL-Q670:
Table of Contents

Advertisement

Quick Links

Download this manual
IMB-ADL-Q670
MODEL:
IMB-ADL-Q670
MicroATX motherboard supports LGA1700 12th/13th
Generation Intel® Core® i9/i7/i5/i3, Pentium® and Celeron®
processor, triple independent display, dual 2.5GbE LAN,
M.2, DDR4, USB 3.2, SATA 6Gb/s, HD Audio and RoHS
User Manual
Page 1
Rev. 1.00 – May 5, 2023

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IMB-ADL-Q670 and is the answer not in the manual?

Questions and answers

Related Manuals for IEI Technology IMB-ADL-Q670

Summary of Contents for IEI Technology IMB-ADL-Q670

  • Page 1 IMB-ADL-Q670 MODEL: IMB-ADL-Q670 MicroATX motherboard supports LGA1700 12th/13th Generation Intel® Core® i9/i7/i5/i3, Pentium® and Celeron® processor, triple independent display, dual 2.5GbE LAN, M.2, DDR4, USB 3.2, SATA 6Gb/s, HD Audio and RoHS User Manual Page 1 Rev. 1.00 – May 5, 2023...
  • Page 2 IMB-ADL-Q670 Revision Date Version Changes May 5, 2023 1.00 Initial release Page 2...
  • Page 3 IMB-ADL-Q670 Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
  • Page 4 IMB-ADL-Q670 Manual Conventions WARNING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. CAUTION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product.

  • Page 5: Table Of Contents

    PTIONAL TEMS 3 CONNECTORS ......................27 3.1 P ..............28 ERIPHERAL NTERFACE ONNECTORS 3.1.1 IMB-ADL-Q670 Layout ................... 28 3.1.2 Peripheral Interface Connectors ..............28 3.1.3 External Interface Panel Connectors ............... 30 3.3 I ..............31 NTERNAL ERIPHERAL ONNECTORS 3.3.1 CPU 12V Power Connector ................31 3.3.2 ATX Power Connector ..................
  • Page 6 IMB-ADL-Q670 3.3.12 Front Panel Connector .................. 43 3.3.13 I C Connector ....................44 3.3.14 SMBus Connector ..................45 3.3.15 LAN Link LED connector ................46 3.3.16 M.2 M-key Slot ....................47 3.3.17 PCIe x1 Slots ....................49 3.3.18 PCIe x4 Slots ....................50 3.3.19 PCIe x16 slots ....................
  • Page 7 IMB-ADL-Q670 5.1 I ......................86 NTRODUCTION 5.1.1 Starting Setup ....................86 5.1.2 Using Setup ...................... 87 5.1.2.1 Keyboard Navigation ................87 5.1.2.2 Touch Navigation ..................88 5.1.3 Getting Help ..................... 89 5.1.4 Unable to Reboot after Configuration Changes ..........89 5.1.5 BIOS Menu Bar ....................
  • Page 8 IMB-ADL-Q670 5.4.1.4 PEG Port Configuration ................132 5.4.2 PCH-IO Configuration .................. 133 5.4.2.1 PCI Express Configuration ..............135 5.4.2.1.2 PCIe Root Port Setting ............... 136 5.4.2.2 SATA Configuration ................138 5.4.2.3 HD Audio Configuration ................. 139 5.5 S ....................... 140 ECURITY 5.6 B...
  • Page 9 IMB-ADL-Q670 List of Figures Figure 1-1: IMB-ADL-Q670 ......................16 Figure 1-2: Connectors ........................18 Figure 1-3: IMB-ADL-Q670 Dimensions (mm) ................19 Figure 1-4: Data Flow Diagram ....................20 Figure 3-1: Peripheral Interface Connectors ................28 Figure 3-2: CPU 12V Power Connector Location ..............31 Figure 3-3: ATX Power Connector Location ................32 Figure 3-4: Battery Connector Location ..................34...
  • Page 10 IMB-ADL-Q670 Figure 3-28: RAA229132 FW Flash Connector Location ............61 Figure 3-29: MP2940C FW Flash Connector Location ..............62 Figure 3-30: External Peripheral Interface Connector ..............63 Figure 3-31: USB 2.0 Connector ....................63 Figure 3-32: USB 3.2 Gen 1 Connector..................64 Figure 3-33: USB 3.2 and RJ45 Connector ................65 Figure 3-34: VGA and DVI-I connector ..................66...
  • Page 11 IMB-ADL-Q670 List of Tables Table 1-1: IMB-ADL-Q670 Specifications ...................22 Table 2-1: Packing List .........................25 Table 2-2: Optional Items ......................26 Table 3-1: Peripheral Interface Connectors ................30 Table 3-2: Rear Panel Connectors ....................30 Table 3-3: CPU 12V Power Connector Pinouts ................32 Table 3-4: ATX Power Connector Pinouts..................33 Table 3-5: Battery Connector Pinouts ..................34...
  • Page 12 IMB-ADL-Q670 Table 3-29: USB 3.2 Port Pinouts ....................65 Table 3-30: Dual RJ45 Pinouts ....................66 Table 3-31: External VGA Connector Pinouts ................67 Table 3-32: External DVI-I Connector Pinouts ................67 Table 5-1: BIOS Navigation Keys ....................87 Table 5-2: BIOS On-screen Navigation Keys ................88...
  • Page 13 IMB-ADL-Q670 BIOS Menus BIOS Menu 1: Main (1/3) .......................90 BIOS Menu 2: Main (2/3) .......................91 BIOS Menu 3: Main (3/3) .......................91 BIOS Menu 4: Advanced (1/2) ......................93 BIOS Menu 5: Advanced (2/2) ......................94 BIOS Menu 6: CPU Configuration (1/4)..................95 BIOS Menu 7: CPU Configuration (2/4)..................96 BIOS Menu 8: CPU Configuration (3/4)..................96...
  • Page 14 IMB-ADL-Q670 BIOS Menu 32: COM Console Redirection Settings ...............122 BIOS Menu 33: NVMe Configuration ..................124 BIOS Menu 34: Chipset ......................125 BIOS Menu 35: System Agent (SA) Configuration ..............126 BIOS Menu 36: Memory Configuration ..................127 BIOS Menu 37: Graphics Configuration ...................128 BIOS Menu 38: LCD Control ......................130...

  • Page 15: Introduction

    IMB-ADL-Q670 Chapter Introduction Page 15...

  • Page 16: Ntroduction

    1.1 Introduction Figure 1-1: IMB-ADL-Q670 The IMB-ADL-Q670 is a microATX motherboard. It accepts a Socket LGA1700 Intel® 12/13th Core® i9/i7/i5/i3, Pentium® or Celeron® processor and supports four 288-pin 3200MHz dual-channel unbuffered DDR4 SDRAM DIMM slots supporting up to 128 GB memory.

  • Page 17: Features

    IMB-ADL-Q670 1.2 Features Some of the IMB-ADL-Q670 motherboard features are listed below: ▪ LGA1700 12th/13th Generation Intel® Core® i9/i7/i5/i3, Celeron® and Pentium® processors (up to 125W TDP) ▪ Four 288-pin 3200MHz dual-channel unbuffered DDR4 SDRAM DIMM slots supporting up to 128 GB memory ▪...

  • Page 18: Connectors

    IMB-ADL-Q670 1.3 Connectors The connectors on the IMB-ADL-Q670 are shown in the figure below. Figure 1-2: Connectors Page 18...

  • Page 19: Dimensions

    IMB-ADL-Q670 1.4 Dimensions The main dimensions of the IMB-ADL-Q670 are shown in the diagram below. Figure 1-3: IMB-ADL-Q670 Dimensions (mm) Page 19...

  • Page 20: Data Flow

    IMB-ADL-Q670 1.5 Data Flow Figure 1-4 shows the data flow between the system chipset, the CPU and other components installed on the motherboard. Figure 1-4: Data Flow Diagram Page 20...

  • Page 21: Technical Specifications

    IMB-ADL-Q670 1.6 Technical Specifications The IMB-ADL-Q670 technical specifications are listed below. 74 7H Specification/Model IMB-ADL-Q670 microATX Form Factor 12th/13th Generation Intel® Core® i9/i7/i5/i3, Pentium® and CPU Supported Celeron® processor Intel® Q670/Q670E Chipset Four 288-pin 3200MHz dual-channel unbuffered DDR4 Memory SDRAM DIMM slots supporting up to 128 GB memory New Intel®...

  • Page 22: Table 1-1: Imb-Adl-Q670 Specifications

    DDR4 memory, EuP mode enabled) 0ºC ~ 60ºC Operating Temperature -30ºC ~ 70ºC Storage Temperature 5% ~ 95% (non-condensing) Operating Humidity Physical Specifications 244 mm x 244 mm Dimensions Weight (GW/NW) 1200g / 700g Table 1-1: IMB-ADL-Q670 Specifications Page 22...

  • Page 23: Packing List

    IMB-ADL-Q670 Chapter Packing List Page 23...

  • Page 24: Anti-Static Precautions

    Only handle the edges of the PCB: Don't touch the surface of the motherboard. Hold the motherboard by the edges when handling. 2.2 Unpacking Precautions When the IMB-ADL-Q670 is unpacked, please do the following: ▪ Follow the anti-static guidelines above.

  • Page 25: Packing List

    If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the IMB-ADL-Q670 was purchased from or contact an IEI sales representative directly by sending an email to sales@ieiworld.com.

  • Page 26: Optional Items

    IMB-ADL-Q670 2.4 Optional Items The following are optional components which may be separately purchased: Item and Part Number Image RS-232/422/485 cable, 230mm, P=2.54 (P/N: 32205-000702-200-RS) SATA power cable (P/N: 32102-000100-200-RS) RS-232 cable,230mm，P=2.54 (P/N: 32205-000702-100-RS) RS-232 cable, 400mm, 2x20 pin, p=2.54...

  • Page 27: Connectors

    IMB-ADL-Q670 Chapter Connectors Page 27...

  • Page 28: Peripheral Interface Connectors

    IMB-ADL-Q670 3.1 Peripheral Interface Connectors This chapter details all the peripheral interface connectors. 3.1.1 IMB-ADL-Q670 Layout The figures below show all the peripheral interface connectors. Figure 3-1: Peripheral Interface Connectors 3.1.2 Peripheral Interface Connectors The table below lists all the connectors on the board.
  • Page 29 IMB-ADL-Q670 Connector Type Label ATX1 ATX power connector 24-pin connector CPU12V1 ATX CPU 12V power connector 8-pin Molex power connector BAT2 RTC battery connector 2-pin header CHASSIS1 Chassis intrusion connector 2-pin header CHA_DIMM0, DDR4 DIMM slots 288-pin socket CHA_DIMM1, CHB_DIMM0,...

  • Page 30: External Interface Panel Connectors

    IMB-ADL-Q670 Connector Type Label PWR_BTN1 Onboard power button Push button RAA229132 FW flash connector 3-pin header MP2940C FW flash connector 3-pin header Table 3-1: Peripheral Interface Connectors 3.1.3 External Interface Panel Connectors The table below lists the connectors on the external I/O panel.

  • Page 31: Internal Peripheral Connectors

    IMB-ADL-Q670 3.3 Internal Peripheral Connectors The section describes all of the connectors on the IMB-ADL-Q670. 3.3.1 CPU 12V Power Connector CN Label: CPU12V1 CN Type: 8-pin Molex power connector, p=4.2mm CN Location: See Figure 3-2 CN Pinouts: See Table 3-3 This connector provides power to the CPU.

  • Page 32: Atx Power Connector

    IMB-ADL-Q670 PIN NO. DESCRIPTION PIN NO. DESCRIPTION +12V Table 3-3: CPU 12V Power Connector Pinouts 3.3.2 ATX Power Connector CN Label: ATX1 CN Type: 24-pin connector, p=4.2 mm CN Location: See Figure 3-3 CN Pinouts: See Table 3-4 The ATX power connector connects to an ATX power supply.

  • Page 33: Battery Connector

    Dispose of used batteries according to instructions and local regulations. NOTE: It is recommended to attach the RTC battery onto the system chassis in which the IMB-ADL-Q670 is installed. CN Label: BAT2 CN Type: 2-pin header...

  • Page 34: Chassis Intrusion Connector

    IMB-ADL-Q670 A system battery is placed in the battery holder. The battery provides power to the system clock to retain the time when power is turned off. Figure 3-4: Battery Connector Location Description Description VBATT Table 3-5: Battery Connector Pinouts 3.3.4 Chassis Intrusion Connector...

  • Page 35: Figure 3-5: Chassis Intrusion Connector Location

    IMB-ADL-Q670 Figure 3-5: Chassis Intrusion Connector Location Description Description CASEOPEN_N Table 3-6: Chassis Intrusion Connector Pinouts Page 35...

  • Page 36: At/Atx Power Mode Setting

    IMB-ADL-Q670 3.3.5 AT/ATX Power Mode Setting CN Label: J_ATX_AT1 CN Type: 3-pin switch CN Location: Figure 3-6 CN Pinouts: See Table 3-7 The AT/ATX power mode selection is made through the AT/ATX power mode switch. Figure 3-6: AT/ATX Power Mode Switch Locations...

  • Page 37: Digital I/O Connector

    IMB-ADL-Q670 3.3.6 Digital I/O Connector CN Label: DIO1 CN Type: 14-pin header, p=2.0 mm CN Location: See Figure 3-7 CN Pinouts: See Table 3-8 The Digital I/O connector provides programmable input and output for external devices. Figure 3-7: Digital I/O Connector Location...

  • Page 38: Ec Debug Connector

    IMB-ADL-Q670 3.3.7 EC Debug Connector CN Label: DEBUG_1 CN Type: 6-pin header CN Location: See Figure 3-8 CN Pinouts: See Table 3-9 The EC debug connector is used for EC debug. Figure 3-8: EC Debug Connector Location Description Description EDICLK...

  • Page 39: Clear Cmos Button

    IMB-ADL-Q670 3.3.8 Clear CMOS Button CN Label: J_CMOS1 CN Type: Button CN Location: See Figure 3-9 CN Pinouts: See Table 3-10 The J_CMOS1 is used to Clear CMOS Setup. Figure 3-9: Clear CMOS Jumper Location Description Keep CMOS Setup (Normal Operation)

  • Page 40: Fan Connector (Cpu)

    IMB-ADL-Q670 3.3.9 Fan Connector (CPU) CN Label: CPU_FAN1 CN Type: 4-pin header, p=2.54 mm CN Location: See Figure 3-10 CN Pinouts: See Table 3-11 The fan connector attaches to a CPU cooling fan. Figure 3-10: CPU Fan Connector Location Description...

  • Page 41: Fan Connectors (System)

    IMB-ADL-Q670 3.3.10 Fan Connectors (System) CN Label: SYS_FAN1 CN Type: 4-pin header, p=2.54 mm CN Location: See Figure 3-11 CN Pinouts: See Table 3-12 Fan connector attaches to a system cooling fan. The fan connector provides smart fan function. Figure 3-11: System Fan Connector Locations...

  • Page 42: Audio Connector

    IMB-ADL-Q670 3.3.11 Audio Connector CN Label: FRONT-PANEL1 CN Type: 10-pin header, p=2.54 mm CN Location: See Figure 3-12 CN Pinouts: See Table 3-13 This connector connects to speakers, a microphone and an audio input. Figure 3-12: Audio Connector Location Description...

  • Page 43: Front Panel Connector

    IMB-ADL-Q670 3.3.12 Front Panel Connector CN Label: F_PANEL1 CN Type: 14-pin header, p=2.54 mm CN Location: See Figure 3-13 CN Pinouts: See Table 3-14 The front panel connector connects to the indicator LEDs and buttons on the computer's front panel.

  • Page 44: I 2 C Connector

    IMB-ADL-Q670 3.3.13 I C Connector CN Label: J_I2C1 CN Type: 4-pin wafer, p=1.25 mm CN Location: See Figure 3-14 CN Pinouts: See Table 3-15 The I C connector is used to connect I C-bus devices to the mainboard. Figure 3-14: I...

  • Page 45: Smbus Connector

    IMB-ADL-Q670 3.3.14 SMBus Connector CN Label: J_SMB1 CN Type: 4-pin wafer, p=1.25 mm CN Location: See Figure 3-15 CN Pinouts: See Table 3-16 The SMBus (System Management Bus) connector provides low-speed system management communications. Figure 3-15: SMBus Connector Location Description...

  • Page 46: Lan Link Led Connector

    IMB-ADL-Q670 3.3.15 LAN Link LED connector CN Label: JLAN_LED1, JLAN_LED2 CN Type: 2-pin header, p=2.00 mm CN Location: Figure 3-16 CN Pinouts: Table 3-17 and Table 3-18 788H The LAN LED connectors are used to connect to the LAN LED indicators on the chassis to indicate users the link activities of the two LAN ports.

  • Page 47: M-Key Slot

    IMB-ADL-Q670 3.3.16 M.2 M-key Slot CN Label: M2_M1, M2_M2 CN Type: M-key slot CN Location: See Figure 3-17 CN Pinouts: See Table 3-19 The M.2 2242/2280 slot is keyed in the M position. Figure 3-17: M.2 M-key Slot Location Description Description +3.3V...

  • Page 48: Table 3-19: M.2 M-Key Connector Pinouts

    IMB-ADL-Q670 Description Description PCIE_3_RX_DP PCIE_TX_DN3 PCIE_TX_DP3 PCIE_2_RX_DN PCIE_2_RX_DP PCIE_TX_DN2 PCIE_TX_DP2 M_2_SSD_SLP PCIE_1_RX_DN PCIE_1_RX_DP PCIE_TX_DN1 PCIE_TX_DP1 PLT_RST_N SRCCLKREQB_17_N PCIE_CLK_DN17 PCIE_CLK_DP17 PEDET +3.3V +3.3V +3.3V Table 3-19: M.2 M-key Connector Pinouts Page 48...

  • Page 49: Pcie X1 Slots

    IMB-ADL-Q670 3.3.17 PCIe x1 Slots CN Label: PCIE7 CN Type: PCIe x1 Slot CN Location: See Figure 3-18 The PCIe x1 slot enables a PCIe x1 expansion module to be connected to the board. Figure 3-18: PCIe x1 Slot Locations...

  • Page 50: Pcie X4 Slots

    IMB-ADL-Q670 3.3.18 PCIe x4 Slots CN Label: PCIE1, PCIE6 CN Type: PCIe x4 slot CN Location: See Figure 3-19 The PCIe x4 expansion card slots are for PCIe x4 expansion cards. Figure 3-19: PCIe x4 Slot Locations Page 50...

  • Page 51: Pcie X16 Slots

    IMB-ADL-Q670 3.3.19 PCIe x16 slots CN Label: PCIE8 CN Type: PCIe x16 slot CN Location: See Figure 3-20 The PCIe x16 expansion card slots are for PCIe x16 expansion cards. Figure 3-20: PCIe x16 Slot Locations Page 51...

  • Page 52: Onboard Power Button

    IMB-ADL-Q670 3.3.20 Onboard Power Button CN Label: PWR_BTN1 CN Type: Push button CN Location: See Figure 3-21 The on-board power button controls system power. Figure 3-21: Power Button Location Page 52...

  • Page 53: Ddr4 Dimm Sockets

    IMB-ADL-Q670 3.3.21 DDR4 DIMM sockets CN Label: CHA_DIMM0, CHA_DIMM1, CHB_DIMM0, CHB_DIMM1 CN Type: 288-pin socket CN Location: See Figure 3-22 The DIMM slots are for DDR4 DIMM memory modules Figure 3-22: DDR4 DIMM Sockets Location Page 53...

  • Page 54: Sata 6Gb/S Connectors

    IMB-ADL-Q670 3.3.22 SATA 6Gb/s Connectors CN Label: SATA1, SATA2, SATA3, SATA4 CN Type: 8-pin SATA connector CN Location: See Figure 3-23 CN Pinouts: See Table 3-20 The SATA drive connectors can be connected to SATA drives and support up to 6Gb/s data transfer rate.

  • Page 55: Serial Port Connectors

    IMB-ADL-Q670 3.3.23 RS-232 Serial Port Connectors CN Label: COM3-6 CN Type: 40-pin box header, p=2.54 mm CN Location: See Figure 3-24 CN Pinouts: See Table 3-21 Each of these connectors provides RS-232 communications. Figure 3-24: RS-232 Connector Location Description Description...

  • Page 56: Table 3-21: Rs-232 Connector Pinouts

    IMB-ADL-Q670 Description Description RXD4 RTS4 TXD4 CTS4 DTR4 GND4 GND4 DCD5 DSR5 RXD5 RTS5 TXD5 CTS5 DTR5 GND5 GND5 DCD6 DSR6 RXD6 RTS6 TXD6 CTS6 DTR6 GND6 GND6 Table 3-21: RS-232 Connector Pinouts Page 56...

  • Page 57: Serial Port Connectors

    IMB-ADL-Q670 3.3.24 RS-232 Serial Port Connectors CN Label: COM7-10 CN Type: 40-pin box header, p=2.54 mm CN Location: See Figure 3-24 CN Pinouts: See Table 3-21 Each of these connectors provides RS-232 communications. Figure 3-25: RS-232 Connector Location Description Description...

  • Page 58: Table 3-22: Rs-232 Connector Pinouts

    IMB-ADL-Q670 Description Description RXD8 RTS8 TXD8 CTS8 DTR8 GND8 GND8 DCD9 DSR9 RXD9 RTS9 TXD9 CTS9 DTR9 GND9 GND9 DCD10 DSR10 RXD10 RTS10 TXD10 CTS10 DTR10 RI10 GND10 GND10 Table 3-22: RS-232 Connector Pinouts Page 58...

  • Page 59: Rs-232/422/485 Serial Port Connectors

    IMB-ADL-Q670 3.3.25 RS-232/422/485 Serial Port Connectors CN Label: COM1, COM2 CN Type: 9-pin header, p=2.54 mm CN Location: See Figure 3-24 CN Pinouts: See Table 3-23 Each of these connectors provides RS-232/422/485 communications. Figure 3-26: RS-232/422/485 Connector Location RS-232 RS-422...

  • Page 60: Flash Spi Rom Connector

    IMB-ADL-Q670 3.3.26 Flash SPI ROM Connector CN Label: JSPI1 CN Type: 6-pin header, p=1.25 mm CN Location: See Figure 3-27 CN Pinouts: See Table 3-24 The Flash SPI ROM connector is used to flash the SPI ROM. Figure 3-27: Flash SPI ROM Connector Location...

  • Page 61: Raa229132 Fw Flash Connector

    IMB-ADL-Q670 3.3.27 RAA229132 FW Flash Connector CN Label: CN Type: 3-pin header, p=1.27 mm CN Location: See Figure 3-28 CN Pinouts: See Table 3-25 Figure 3-28: RAA229132 FW Flash Connector Location Description Description PM_SCL PM_SDA Table 3-25: RAA229132 FW Flash Connector Pinouts...

  • Page 62: Mp2940C Fw Flash Connector

    IMB-ADL-Q670 3.3.28 MP2940C FW Flash Connector CN Label: CN Type: 3-pin header, p=1.27 mm CN Location: See Figure 3-28 CN Pinouts: See Table 3-25 Figure 3-29: MP2940C FW Flash Connector Location Description Description PM_SCL PM_SDA Table 3-26: MP2940C FW Flash Connector Pinouts...

  • Page 63: External Peripheral Interface Connector Panel

    3.4.1 External USB 2.0 connector CN Label: USB 5 CN Type: USB 2.0 CN Location: See Figure 3-31 CN Pinouts: See Table 3-27 The external USB 2.0 connectors on the IMB-ADL-Q670. Figure 3-31: USB 2.0 Connector Description Description USB DATA- USB DATA+ Page 63...

  • Page 64: External Usb 3.2 Gen 1 Connector

    USB 4, USB 3 CN Type: USB 3.2 CN Location: See Figure 3-32 CN Pinouts: See Table 3-28 The external USB 3.2 Gen 1 connectors on the IMB-ADL-Q670. Figure 3-32: USB 3.2 Gen 1 Connector Description Description USB_DATA- USB_DATA- USB_DATA+...

  • Page 65: External 2.5Gbe Rj-45 And Dual Usb 3.2 Gen 2 Combo Connector

    IMB-ADL-Q670 3.4.3 External 2.5GbE RJ-45 and dual USB 3.2 Gen 2 combo connector CN Label: LAN1_USB1, LAN2_USB2 CN Type: USB 3.2, RJ45 CN Location: See Figure 3-33 CN Pinouts: See Table 3-29 and Table 3-30 The LAN1_USB1 and LAN2_USB2 include dual USB 3.2 Gen 2 (10Gb/s) and one 2.5GbE RJ-45.

  • Page 66: External Vga And Dvi-I Combo Connector

    IMB-ADL-Q670 The dual 2.5GbE RJ-45 connector. DESCRIPTION DESCRIPTION LAN1_MDI0P LAN1_MDI2P LAN1_MDI0N LAN1_MDI2N LAN1_MDI1P LAN1_MDI3P LAN1_MDI1N LAN1_MDI3N Table 3-30: Dual RJ45 Pinouts 3.4.4 External VGA and DVI-I combo connector CN Label: DVI1 CN Type: VGA, DVI CN Location: See Figure 3-34...

  • Page 67: Table 3-31: External Vga Connector Pinouts

    IMB-ADL-Q670 Description Description VGA_SCL Table 3-31: External VGA Connector Pinouts The DVI connector connects to DVI device. Description Description HDMI_DATA2#1_L SHIELD_GND HDMI_DATA2-1_L HDMIC_OB_HPD SHIELD_GND HDMI_DATA0#1_L HDMI_DATA0-1_L SHIELD_GND HDMIC_OB_SCL HDMIC_OB_SDA SHIELD_GND HDMI_DATA1#1_L HDMI_CLK-1_L HDMI_DATA1-1_L HDMI_CLK#-1_L SHIELD_GND SHIELD_GND SHIELD_GND SHIELD_GND SHIELD_GND Table 3-32: External DVI-I Connector Pinouts...

  • Page 68: Installation

    IMB-ADL-Q670 Chapter Installation Page 68...

  • Page 69: Anti-Static Precautions

    This section outlines the installation of peripheral devices to the onboard connectors. 4.2.1 SATA Drive Connection The IMB-ADL-Q670 is shipped with two SATA drive cables. To connect the SATA drives to the connectors, please follow the steps below. Step 1: Locate the connectors.

  • Page 70: Figure 4-1: Sata Drive Cable Connection

    IMB-ADL-Q670 Step 2: Insert the cable connector. Insert the cable connector into the on-board SATA drive connector until it clips into place. See Figure 4-1. Figure 4-1: SATA Drive Cable Connection Step 3: Connect the cable to the SATA disk. Connect the connector on the other end of the cable to the connector at the back of the SATA drive.

  • Page 71: Figure 4-2: Sata Power Drive Connection

    IMB-ADL-Q670 Figure 4-2: SATA Power Drive Connection The SATA power cable can be bought from IEI. See Optional Items in Section 2.4. Page 71...

  • Page 72: Installation Considerations

    This helps to prevent potential ESD damage. ▪ Turn all power to the IMB-ADL-Q670 off: When working with the IMB-ADL-Q670, make sure that it is disconnected from all power supplies and that no electricity is being fed into the system.

  • Page 73: Socket Lga1700 Cpu Installation

    IMB-ADL-Q670 ▪ Remove any of the stickers on the PCB board. These stickers are required for warranty validation. ▪ Use the product before verifying all the cables and power connectors are properly connected. ▪ Allow screws to come in contact with the PCB circuit, connector pins, or its components.

  • Page 74: Figure 4-3: Disengage The Cpu Socket Load Lever

    IMB-ADL-Q670 Figure 4-3: Disengage the CPU Socket Load Lever Step 2: Open the socket and remove the protective cover. The black protective cover can be removed by pulling up on the tab labeled "Remove". See Figure 4-4. Page 74...

  • Page 75: Figure 4-4: Remove Protective Cover

    IMB-ADL-Q670 Figure 4-4: Remove Protective Cover Step 3: Inspect the CPU socket. Make sure there are no bent pins and make sure the socket contacts are free of foreign material. If any debris is found, remove it with compressed air.

  • Page 76: Figure 4-5: Insert The Socket Lga1700 Cpu

    IMB-ADL-Q670 Step 7: Insert the CPU. Gently insert the CPU into the socket. If the CPU pins are properly aligned, the CPU should slide into the CPU socket smoothly. See Figure 4-5. Figure 4-5: Insert the Socket LGA1700 CPU Step 8: Close the CPU socket.

  • Page 77: Socket Lga1700 Cooling Kit Installation

    IMB-ADL-Q670 Figure 4-6: Close the Socket LGA1700 Step 9: Connect the 12 V power to the board. Connect the 12 V power from the power supply to the board. 4.5 Socket LGA1700 Cooling Kit Installation WARNING: DO NOT attempt to install a push-pin cooling fan.

  • Page 78: Figure 4-7: Cooling Kit Support Bracket

    IMB-ADL-Q670 WARNING: Do not wipe off (accidentally or otherwise) the pre-sprayed layer of thermal paste on the bottom of the heat sink. The thermal paste between the CPU and the heat sink is important for optimum heat dissipation. To install the cooling kit, follow the instructions below.

  • Page 79: Dimm Installation

    Do not overtighten the screws. Step 5: Connect the fan cable. Connect the cooling kit fan cable to the CPU fan connector on the IMB-ADL-Q670. Carefully route the cable and avoid heat generating chips and fan blades.Step 0: 4.6 DIMM Installation...

  • Page 80: Module Installation

    4.7 M.2 Module Installation The IMB-ADL-Q670 provide two ways to install the M.2 expansion card. One is using screw, and the other is using the retainer. Please follow the steps below. Mode One: Using screw Step 1: Locate the M.2 module slot.

  • Page 81: Figure 4-10: Securing The M.2 Module

    IMB-ADL-Q670 Figure 4-10: Securing the M.2 Module Mode Two: Using the Retainer Step 1: Press the retainer down as shown below. (See Figure 4-11) Figure 4-11: Press the Retainer Page 81...

  • Page 82: Figure 4-12: Aligning The M.2 Module With The Retainer

    IMB-ADL-Q670 Step 2: Line up the notch on the M.2 module with the notch on the slot. Slide the M.2 module into the socket at an angle of about 20º. (See Figure 4-9) Step 3: Align the notch on the end of the M.2 module with the clip of the retainer. (See Figure 4-12) Figure 4-12: Aligning the M.2 Module with the Retainer...

  • Page 83: Software Installation

    IMB-ADL-Q670 4.8 Software Installation All the drivers for the IMB-ADL-Q670 are available on IEI Resource Download Center (https://download.ieiworld.com). Type IMB-ADL-Q670 and press Enter to find all the relevant software, utilities, and documentation. Figure 4-14: IEI Resource Download Center 4.9 Driver Download To download drivers from IEI Resource Download Center, follow the steps below.
  • Page 84 IMB-ADL-Q670 Step 3: Click the driver file name on the page and you will be prompted with the  following window. You can download the entire ISO file ( ), or click the small  arrow to find an individual driver and click the file name to download (...

  • Page 85: Bios

    IMB-ADL-Q670 Chapter BIOS Page 85...

  • Page 86: Introduction

    IMB-ADL-Q670 5.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. NOTE: Some of the BIOS options may vary throughout the life cycle of the product and are subject to change without prior notice.

  • Page 87: Using Setup

    IMB-ADL-Q670 5.1.2 Using Setup The BIOS Setup menu can be navigated by using a keyboard or a touchscreen. 5.1.2.1 Keyboard Navigation For keyboard navigation, use the navigation keys shown in Table 5-1. Function Up arrow Move to previous item Down arrow...

  • Page 88: Touch Navigation

    IMB-ADL-Q670 5.1.2.2 Touch Navigation For touchscreen navigation, use the on-screen navigation keys shown below. On-screen Button Function Previous Values Load the last value you set. Optimized Defaults Load the factory default values in order to achieve the best performance. Back Return to the previous menu.

  • Page 89: Getting Help

    IMB-ADL-Q670 5.1.3 Getting Help When F1 is pressed a small help window describing the appropriate keys to use and the possible selections for the highlighted item appears. To exit the Help Window, press the key. 5.1.4 Unable to Reboot after Configuration Changes If the computer cannot boot after changes to the system configuration is made, CMOS defaults.

  • Page 90: Main

    IMB-ADL-Q670 5.2 Main The Main BIOS menu (BIOS Menu 2) appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. BIOS Menu 1: Main (1/3) Page 90...
  • Page 91 IMB-ADL-Q670 BIOS Menu 2: Main (2/3) BIOS Menu 3: Main (3/3) ➔ BIOS Information The BIOS Information lists a brief summary of the BIOS. The fields in BIOS Information cannot be changed. The items shown in the system overview include: ▪...
  • Page 92 IMB-ADL-Q670 ▪ Type: Displays the Processor Type ▪ Speed: Displays the Processor Speed ▪ ID: Displays the Processor ID ➔ PCH Information The PCH Information lists a brief summary of the PCH. The fields in PCH Information cannot be changed. The items shown in the system overview include: ▪...

  • Page 93: Advanced

    IMB-ADL-Q670 5.3 Advanced Use the Advanced menu (BIOS Menu 4) to configure the CPU and peripheral devices through the following sub-menus: WARNING! Setting the wrong values in the sections below may cause the system to malfunction. Make sure that the settings made are compatible with the hardware.
  • Page 94 IMB-ADL-Q670 BIOS Menu 5: Advanced (2/2) Page 94...

  • Page 95: Cpu Configuration

    IMB-ADL-Q670 5.3.1 CPU Configuration Use the CPU Configuration menu (BIOS Menu 6) to view detailed CPU specifications or enable the Intel Virtualization Technology. BIOS Menu 6: CPU Configuration (1/4) Page 95...
  • Page 96 IMB-ADL-Q670 BIOS Menu 7: CPU Configuration (2/4) BIOS Menu 8: CPU Configuration (3/4) Page 96...
  • Page 97 IMB-ADL-Q670 BIOS Menu 9: CPU Configuration (4/4) ➔ Intel (VMX) Virtualization Technology [Enabled] Use the Intel (VMX) Virtualization Technology option to enable or disable virtualization on the system. When combined with third party software, Intel® Virtualization technology allows several OSs to run on the same system at the same time.
  • Page 98 IMB-ADL-Q670 ➔ Active Efficient Cores [All] Use the Active Efficient Cores BIOS option to enable numbers of E-cores in the processor package. ➔ Enable all E-cores in the processor package. EFAULT ➔ Enable zero E-core in the processor package. ➔...
  • Page 99 IMB-ADL-Q670 ➔ Disabled Disables Turbo Mode Technology ➔ Enabled EFAULT Enables Turbo Mode Technology ➔ C states [Disabled] Use the C states option to enable or disable CPU power management which allows CPU to go to C states when it is not 100% utilized.

  • Page 100: Trusted Computing

    IMB-ADL-Q670 5.3.2 Trusted Computing Use the Trusted Computing menu (BIOS Menu 10) to configure settings related to the Trusted Computing Group (TCG) Trusted Platform Module (TPM). BIOS Menu 10: PCH-FW Configuration ➔ TPM Support [Enable] Use the TPM Support option to enable or disable BIOS support for security device.

  • Page 101: Rtc Wake Settings

    IMB-ADL-Q670 5.3.3 RTC Wake Settings The RTC Wake Settings menu (BIOS Menu 11) configures RTC wake event. BIOS Menu 11: RTC Wake Settings (1/2) BIOS Menu 12: RTC Wake Settings (2/2) Page 101...
  • Page 102 IMB-ADL-Q670 ➔ Wake system with Fixed Time [Enabled] Use the Wake system with Fixed Time option to enable or disable the system wake on alarm event. ➔ Disabled The real time clock (RTC) cannot generate a wake event ➔ Enabled...

  • Page 103: F81966 Super Io Configuration

    IMB-ADL-Q670 5.3.4 F81966 Super IO Configuration Use the F81966 Super IO Configuration menu (BIOS Menu 13) to set or change the configurations for serial ports. BIOS Menu 13: F81966 Super IO Configuration Page 103...

  • Page 104: Serial Port 1 Configuration

    IMB-ADL-Q670 5.3.4.1 Serial Port 1 Configuration Use the Serial Port 1 Configuration menu (BIOS Menu 14) to configure the serial port. BIOS Menu 14: Serial Port 1 Configuration Menu ➔ Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port.

  • Page 105: Serial Port 2 Configuration

    IMB-ADL-Q670 ➔ RS232 The serial port mode is RS-232 EFAULT RS422 with Register The serial port mode is RS-422 RS485 with Register The serial port mode is RS-485 5.3.4.2 Serial Port 2 Configuration Use the Serial Port 2 Configuration menu (BIOS Menu 15) to configure the serial port.

  • Page 106: Serial Port 3 Configuration

    IMB-ADL-Q670 ➔ IO=2F8h; Serial Port I/O port address is 2F8h and the interrupt IRQ=3 address is IRQ3 ➔ Device Mode [RS232] Use the Device Mode option to change the serial port mode. ➔ RS232 The serial port mode is RS-232...

  • Page 107: Serial Port 4 Configuration

    IMB-ADL-Q670 ➔ Disabled Disable the serial port ➔ Enabled Enable the serial port EFAULT ➔ Device Settings The Device Settings option shows the serial port IO port address and interrupt address. ➔ IO=2E0h; Serial Port I/O port address is 2E0h and the interrupt...

  • Page 108: Serial Port 5 Configuration

    IMB-ADL-Q670 ➔ Device Settings The Device Settings option shows the serial port IO port address and interrupt address. ➔ IO=2E8h; Serial Port I/O port address is 2E8h and the interrupt IRQ=10 address is IRQ10 5.3.4.5 Serial Port 5 Configuration Use the Serial Port 5 Configuration menu (BIOS Menu 18) to configure the serial port.

  • Page 109: Serial Port 6 Configuration

    IMB-ADL-Q670 ➔ Device Settings The Device Settings option shows the serial port IO port address and interrupt address. ➔ IO=2C0h; Serial Port I/O port address is 2C0h and the interrupt IRQ=10 address is IRQ10 5.3.4.6 Serial Port 6 Configuration Use the Serial Port 6 Configuration menu (BIOS Menu 19) to configure the serial port.

  • Page 110: F81216Sec Super Io Configuration

    IMB-ADL-Q670 ➔ Device Settings The Device Settings option shows the serial port IO port address and interrupt address. ➔ IO=2C8h; Serial Port I/O port address is 2C8h and the interrupt IRQ=10 address is IRQ10 5.3.5 F81216SEC Super IO Configuration Use the F81216SEC Super IO Configuration menu (BIOS Menu 20) to set or change the configurations for serial ports.

  • Page 111: Serial Port 7 Configuration

    IMB-ADL-Q670 5.3.5.1 Serial Port 7 Configuration Use the Serial Port 7 Configuration menu (BIOS Menu 21) to configure the serial port. BIOS Menu 21: Serial Port 7 Configuration Menu ➔ Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port.

  • Page 112: Serial Port 8 Configuration

    IMB-ADL-Q670 5.3.5.2 Serial Port 8 Configuration Use the Serial Port 8 Configuration menu (BIOS Menu 22) to configure the serial port. BIOS Menu 22: Serial Port 8 Configuration Menu ➔ Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port.

  • Page 113: Serial Port 9 Configuration

    IMB-ADL-Q670 5.3.5.3 Serial Port 9 Configuration Use the Serial Port 9 Configuration menu (BIOS Menu 23) to configure the serial port. BIOS Menu 23: Serial Port 9 Configuration Menu ➔ Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port.

  • Page 114: Serial Port 10 Configuration

    IMB-ADL-Q670 5.3.5.4 Serial Port 10 Configuration Use the Serial Port 10 Configuration menu (BIOS Menu 24) to configure the serial port. BIOS Menu 24: Serial Port 10 Configuration Menu ➔ Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port.

  • Page 115: Ec Kb9068 H/W Monitor

    IMB-ADL-Q670 5.3.6 EC KB9068 H/W Monitor The EC KB9068 H/W Monitor menu (BIOS Menu 25) contains the smart fan mode configuration submenu and shows the state of H/W real-time operating temperature, fan speeds and system voltages. BIOS Menu 25: EC KB9068 H/W Monitor (1/2)
  • Page 116 IMB-ADL-Q670 BIOS Menu 26: EC KB9068 H/W Monitor (2/2) ➔ PC Health Status The following system parameters and values are shown. The system parameters that are monitored are: ▪ System Temperatures: CPU Temperature System Temperature1 ▪ Fan Speeds: CPU_Fan1 Speed SYS_Fan1 Speed ▪...

  • Page 117: Smart Fan Mode Configuration

    IMB-ADL-Q670 5.3.6.1 Smart Fan Mode Configuration Use the Smart Fan Mode Configuration submenu (BIOS Menu 27) to configure the CPU/system fan start/off temperature and control mode. BIOS Menu 27: Smart Fan Mode Configuration ➔ CPU_FAN1 Smart Fan Control [Auto Mode] Use the CPU_FAN1 Smart Fan Control option to configure the CPU Smart Fan.
  • Page 118 IMB-ADL-Q670 ➔ CPU_FAN1 Off Temperature If the CPU temperature is lower than the value set this option, the fan speed change to be lowest. To set a value, Use the + or – key to change the value or enter a decimal number between 1 and 100.

  • Page 119: Serial Port Console Redirection

    IMB-ADL-Q670 5.3.7 Serial Port Console Redirection The Serial Port Console Redirection menu (BIOS Menu 28) allows the console redirection options to be configured. Console Redirection allows users to maintain a system remotely by re-directing keyboard input and text output through the serial port.
  • Page 120 IMB-ADL-Q670 BIOS Menu 29: Serial Port Console Redirection (2/4) BIOS Menu 30: Serial Port Console Redirection (3/4) Page 120...

  • Page 121: Console Redirection Settings

    IMB-ADL-Q670 BIOS Menu 31: Serial Port Console Redirection (4/4) Console Redirection [Disabled] ➔ Use Console Redirection option to enable or disable the console redirection function. ➔ Disabled Disabled the console redirection function EFAULT ➔ Enabled Enabled the console redirection function The Console Redirection Settings submenu will be available when the Console Redirection option is enabled.

  • Page 122: Bios Menu 32: Com Console Redirection Settings

    IMB-ADL-Q670 BIOS Menu 32: COM Console Redirection Settings ➔ Terminal Type [ANSI] Use the Terminal Type option to specify the remote terminal type. ➔ VT100 The target terminal type is VT100 ➔ VT100+ The target terminal type is VT100+ ➔...
  • Page 123 IMB-ADL-Q670 ➔ 57600 Sets the serial port transmission speed at 57600. ➔ 115200 Sets the serial port transmission speed at 115200. EFAULT ➔ Data Bits [8] Use the Data Bits option to specify the number of data bits. ➔ Sets the data bits at 7.

  • Page 124: Nvme Configuration

    IMB-ADL-Q670 5.3.8 NVMe Configuration Use the NVMe Configuration (BIOS Menu 33) menu to display the NVMe controller and device information. BIOS Menu 33: NVMe Configuration Page 124...

  • Page 125: Chipset

    IMB-ADL-Q670 5.4 Chipset Use the Chipset menu (BIOS Menu 34) to access the PCH IO and System Agent (SA) configuration menus. WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction.

  • Page 126: System Agent (Sa) Configuration

    IMB-ADL-Q670 5.4.1 System Agent (SA) Configuration Use the System Agent (SA) Configuration menu (BIOS Menu 35) to configure the System Agent (SA) parameters. BIOS Menu 35: System Agent (SA) Configuration ➔ VT-d [Enabled] Use the VT-d option to enable or disable the VT-d capability.

  • Page 127: Memory Configuration

    IMB-ADL-Q670 5.4.1.1 Memory Configuration Use the Memory Configuration submenu (BIOS Menu 36) to view memory information. BIOS Menu 36: Memory Configuration Page 127...

  • Page 128: Graphics Configuration

    IMB-ADL-Q670 5.4.1.2 Graphics Configuration Use the Graphics Configuration (BIOS Menu 37) menu to configure the video device connected to the system. BIOS Menu 37: Graphics Configuration ➔ Primary Display [Auto] Use the Primary Display option to select the primary graphics controller the system uses.
  • Page 129 IMB-ADL-Q670 option should be set to Enabled and the above Primary Display option should be set to IGFX. ➔ Auto Auto mode ➔ Disabled Disables IGFX. ➔ Enabled Default Enables IGFX. ➔ DVMT Pre-Allocated [160M] Use the DVMT Pre-Allocated option to set the amount of system memory allocated to the integrated graphics processor when the system boots.

  • Page 130: Bios Menu 38: Lcd Control

    IMB-ADL-Q670 ➔ LCD Control BIOS Menu 38: LCD Control Page 130...

  • Page 131: Vmd Configuration

    IMB-ADL-Q670 5.4.1.3 VMD Configuration BIOS Menu 39: VMD Configuration ➔ Enable VMD controller [Disabled] Use the Enable VMD controller option to enable or disable VMD controller. ➔ Disabled Default Disable VMD controller. ➔ Enabled Enable VMD controller. Page 131...

  • Page 132: Peg Port Configuration

    IMB-ADL-Q670 5.4.1.4 PEG Port Configuration BIOS Menu 40: PEG Port Configuration ➔ Detect Non-Compliance Device [Disabled] Use the Detect Non-Compliance Device option to detect non-compliance PCIe device in PEG. ➔ Disabled Do not detect non-compliance PCIe device in PEG EFAULT ➔...

  • Page 133: Pch-Io Configuration

    IMB-ADL-Q670 5.4.2 PCH-IO Configuration Use the PCH-IO Configuration menu (BIOS Menu 41) to configure the PCH parameters. BIOS Menu 41: PCH-IO Configuration (1/2) Page 133...
  • Page 134 IMB-ADL-Q670 BIOS Menu 42: PCH-IO Configuration (2/2) ➔ Auto Power Button Function [Disabled (AT)] Use the Auto Power Button Function BIOS option to show the power mode state. Use the J_ATX_AT1 to switch the AT/ATX power mode. ➔ Enabled (AT) The system power mode is AT.

  • Page 135: Pci Express Configuration

    IMB-ADL-Q670 ➔ USB Power state [S0/S3/S4/S5 ON] Use the USB Power state option to enable or disable the USB Power. ➔ S0/S3/S4/S5 ON USB Power is on. EFAULT ➔ S3/S4/S5 OFF USB Power is off. 5.4.2.1 PCI Express Configuration Use the PCI Express Configuration submenu (BIOS Menu 43) to configure the PCI Express slots.

  • Page 136: Pcie Root Port Setting

    IMB-ADL-Q670 5.4.2.1.2 PCIe Root Port Setting Use the M.2 Slot (M2_M1), PCIE7 Slot (x1), PCIE6 Slot (x4), PCIE1 Slot (x4) submenu (BIOS Menu 44) to configure the PCIe Root Port Setting. BIOS Menu 44: PCIe Slot Configuration Submenu ➔ PCIe Speed [Auto] Use the PCIe Speed option to specify the PCI Express port speed.
  • Page 137 IMB-ADL-Q670 ➔ Disabled Do not detect if a non-compliance PCI Express EFAULT device is connected to the PCI Express port. ➔ Enabled Detect if a non-compliance PCI Express device is connected to the PCI Express port. Page 137...

  • Page 138: Sata Configuration

    IMB-ADL-Q670 5.4.2.2 SATA Configuration Use the SATA Configuration menu (BIOS Menu 45) to change and/or set the configuration of the SATA devices installed in the system. BIOS Menu 45: SATA Configuration ➔ SATA Mode Selection [AHCI] Use the SATA Mode Selection option to determine how the SATA devices operate.

  • Page 139: Hd Audio Configuration

    IMB-ADL-Q670 ➔ Enabled Designates the SATA port as hot-pluggable. 5.4.2.3 HD Audio Configuration Use the HD Audio Configuration menu (BIOS Menu 46) to configure the PCH Azalia settings. BIOS Menu 46: HD Audio Configuration ➔ HD Audio [Enabled] Use the HD Audio option to enable or disable the High Definition Audio controller.

  • Page 140: Security

    IMB-ADL-Q670 5.5 Security Use the Security menu (BIOS Menu 48) to set system and user passwords. BIOS Menu 47: Security (1/2) Page 140...
  • Page 141 IMB-ADL-Q670 BIOS Menu 48: Security (2/2) ➔ Administrator Password Use the Administrator Password to set or change an administrator password. ➔ User Password Use the User Password to set or change a user password. Page 141...

  • Page 142: Boot

    IMB-ADL-Q670 5.6 Boot Use the Boot menu (BIOS Menu 49) to configure system boot options. BIOS Menu 49: Boot 5.6.1 Boot Configuration ➔ Quiet Boot [Enabled] Use the Quiet Boot BIOS option to select the screen display when the system boots.

  • Page 143: Boot Option Priorities

    IMB-ADL-Q670 ➔ Disabled Ignore all PXE Option ROMs EFAULT ➔ Enabled Load PXE Option ROMs. ➔ Option ROM Messages [Force BIOS] Use the Option ROM Messages option to set the Option ROM display mode. ➔ Force Sets display mode to force BIOS.

  • Page 144: Save & Exit

    IMB-ADL-Q670 5.7 Save & Exit Use the Save & Exit menu (BIOS Menu 50) to load default BIOS values, optimal failsafe values and to save configuration changes. BIOS Menu 50: Save & Exit ➔ Save Changes and Reset Use the Save Changes and Reset option to save the changes made to the BIOS options and reset the system.
  • Page 145 IMB-ADL-Q670 ➔ Save as User Defaults Use the Save as User Defaults option to save the changes done so far as user defaults. ➔ Restore User Defaults Use the Restore User Defaults option to restore the user defaults to all the setup options.

  • Page 146: A Regulatory Compliance

    IMB-ADL-Q670 Appendix Regulatory Compliance Page 146...
  • Page 147 IMB-ADL-Q670 DECLARATION OF CONFORMITY This equipment has been tested and found to comply with specifications for CE marking. If the user modifies and/or installs other devices in the equipment, the CE conformity declaration may no longer apply. FCC WARNING This equipment complies with Part 15 of the FCC Rules. Operation is subject to the...

  • Page 148: B Product Disposal

    IMB-ADL-Q670 Appendix Product Disposal Page 148...
  • Page 149 IMB-ADL-Q670 CAUTION: Risk of explosion if battery is replaced by an incorrect type. Only certified engineers should replace the on-board battery. Dispose of used batteries according to instructions and local regulations. ▪ Outside the European Union–If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority so as to comply with the correct disposal method.

  • Page 150: Cbios Options

    IMB-ADL-Q670 Appendix BIOS Options Page 150...
  • Page 151 IMB-ADL-Q670 Below is a list of BIOS configuration options in the BIOS chapter. ➔ BIOS Information .........................91 ➔ Processor Information ......................91 ➔ PCH Information ........................92 ➔ System Date [xx/xx/xx] ......................92 ➔ System Time [xx:xx:xx] .......................92 ➔ Intel (VMX) Virtualization Technology [Enabled] ..............97 ➔...
  • Page 152 IMB-ADL-Q670 ➔ Device Settings ........................111 ➔ Serial Port [Enabled] ......................112 ➔ Device Settings ........................112 ➔ Serial Port [Enabled] ......................113 ➔ Device Settings ........................113 ➔ Serial Port [Enabled] ......................114 ➔ Device Settings ........................114 ➔ PC Health Status ........................116 ➔ CPU_FAN1 Smart Fan Control [Auto Mode] ..............117 ➔...
  • Page 153 IMB-ADL-Q670 ➔ Hot Plug [Disabled] ......................138 ➔ HD Audio [Enabled] ......................139 ➔ Administrator Password ....................141 ➔ User Password ........................141 ➔ Quiet Boot [Enabled] ......................142 ➔ Launch PXE OpROM [Disabled] ..................142 ➔ Option ROM Messages [Force BIOS] ................143 ➔ Boot Option #1 ........................143 ➔...

  • Page 154: D Watchdog Timer

    IMB-ADL-Q670 Appendix Watchdog Timer Page 154...
  • Page 155 IMB-ADL-Q670 NOTE: The following discussion applies to DOS environment. Contact IEI support or visit the IEI website for specific drivers for other operating systems. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash. This condition may have occurred by external EMIs or a software bug.
  • Page 156 IMB-ADL-Q670 NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets. EXAMPLE PROGRAM: ; INITIAL TIMER PERIOD COUNTER W_LOOP: AX, 6F02H ;setting the time-out value BL, 30 ;time-out value is 48 seconds ; ADD THE APPLICATION PROGRAM HERE EXIT_AP, 1 ;is the application over?

  • Page 157: E Error Beep Code

    IMB-ADL-Q670 Appendix Error Beep Code Page 157...

  • Page 158: Pei Beep Codes

    IMB-ADL-Q670 E.1 PEI Beep Codes Number of Beeps Description Memory not Installed Memory was installed twice (InstallPeiMemory routine in PEI Core called twice) Recovery started DXEIPL was not found DXE Core Firmware Volume was not found Recovery failed S3 Resume failed Reset PPI is not available E.2 DXE Beep Codes...

  • Page 159: F Hazardous Materials Disclosure

    IMB-ADL-Q670 Appendix Hazardous Materials Disclosure Page 159...

  • Page 160: Rohs Ii Directive (2015/863/Eu)

    IMB-ADL-Q670 F.1 RoHS II Directive (2015/863/EU) The details provided in this appendix are to ensure that the product is compliant with the RoHS II Directive (2015/863/EU). The table below acknowledges the presences of small quantities of certain substances in the product, and is applicable to RoHS II Directive (2015/863/EU).

  • Page 161: China Rohs

    IMB-ADL-Q670 F.2 China RoHS 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元 件将会单独标示出来。 部件名称 有毒有害物质或元素 壳体 印刷电路板 金属螺帽 电缆组装 风扇组装 电力供应组装 电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11364-2014 與 GB/T26572- 2011 标准规定的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11364-2014 與 GB/T26572-2011 标准规定的限量要求。 Page 161...

Table of Contents