Section 2: Unpacking; Section 3: Getting To Know Your Blender - Blendtec STEALTH 895 Owner's Manual And User's Manual

SECTION 2: UNPACKING

SAVE ALL PACKAGING MATERIALS AND INSTRUCTIONS FOR FUTURE USE
2.1 UNPACKING YOUR BLENDER
You should have received the following items:
• Commercial series blender motor base
• One or more blender jars with lid and sound enclosure*
• Additional literature may be included depending on package configuration�
*Sound enclosure is available only on the Stealth 875™, Stealth 885™ and
Connoisseur 825™ models�
1� Remove blender motor base, blender jar, lids and sound enclosure (if included
with model) from packaging�
2� Unwind the power cord�
3� Check for any packing material that may have blocked ventilation holes on the
underside of the blender motor base�
4� Inspect all items to ensure no damage occurred during shipment�
5� If any damage has occurred, contact your Blendtec service agent immediately�
2.2 RECORDING YOUR SERIAL NUMBER AND DATE OF PURCHASE
Record your blender motor serial number and date of purchase in the space
below� You will need these when contacting Blendtec for service or questions�
Motor Serial # (Found on bottom of motor base):_______________________
Date of Purchase: ____________________________________________
Purchased From: _____________________________________________
2.3 REGISTERING YOUR BLENDER
Register online at www�blendtec�com/registration

SECTION 3: GETTING TO KNOW YOUR BLENDER

3.1 BLENDER MOTOR BASE
• Smart Touch Interface: Varying models consist of preprogrammed cycles,
incremental speed cycles, timed cycles, a Stop button and a Pulse button�
• Hardened Metal Drive Socket: This is where the jar couples with the motor to turn
the blade assembly; made of hardened metal�
• Information Center: This displays the number of times a blend cycle button has
been pressed� It also indicates overload or over-temperature conditions�
• Power Unit: This unit is located within the blender motor base and contains the
computerized electronics that run the blender�
• Motor Base Cover: Houses the power unit in a durable, plastic material�
• Power Cord: The power cord is located at the back of the motor base cover�
3