Section 2: Unpacking - Blendtec CLASSIC SERIES Owner's Manual And User's Manual

1.15 TURN THE POWER SWITCH OFF WHEN NOT IN USE
The Power Switch (ON/OFF switch) is located on the back of the blender motor cover�
1.16 AVOID TOUCHING THE BLENDER DRIVE SOCKET AFTER
EXTENSIVE USE
The blender drive socket may become hot after numerous cycles�
1.17 SAFETY
This appliance is not intended for use by persons (including children) with lack
of experience and knowledge, unless they are given supervision or instruction
concerning the use of the appliance by a person responsible for their safety�
Children should be supervised to ensure that they do not play with the appliance�
1.18 THE CLASSIC SERIES BLENDER IS INTENDED FOR HOME
USE ONLY! ANY USE OF THIS BLENDER FOR COMMERCIAL
PURPOSES VOIDS ALL WARRANTIES
1.19 NEVER OPERATE THE BLENDER WITH MORE THAN THE
MARKED CAPACITY OF THE JAR
SAVE THESE INSTRUCTIONS

SECTION 2: UNPACKING

SAVE ALL PACKAGING MATERIALS AND INSTRUCTIONS FOR FUTURE USE
2.1 UNPACKING YOUR BLENDER
You should have received the following items:
• Classic series motor base
• Blender jar with lid
• Blendtec 101 booklet
• Customer Service and Warranty Registration Card
Additional literature may be included depending on package configuration
1� Remove blender motor base, blender jar, and lid from packaging�
2� Unwind the power cord�
3� Check for any packing material that may have blocked ventilation holes on the
underside of the blender motor base�
4� Inspect all items to ensure no damage occurred during shipment�
5� If any damage has occurred, contact your Blendtec service agent immediately�
2.2 RECORDING YOUR SERIAL NUMBER AND DATE OF
PURCHASE
Record your blender motor serial number and date of purchase in the space below�
You will need these when contacting Blendtec for service or questions�
3