Section 2 - Unpacking - Blendtec CLASSIC Series Owner's Manual And User's Manual

SECTION 2: UNPACKING
SAVE ALL PACKAGING MATERIALS AND INSTRUCTIONS FOR FUTURE USE
2.1 UNPACKING YOUR BLENDER
You should have received the following items:
Classic series motor base • Classic series motor base
Blender jar with lid • Blender jar with lid
Blendtec 101 booklet • Blendtec 101 booklet
Customer Service and Warranty Registration Card • Customer Service and Warranty Registration Card
Additional literature may be included depending on package configuration.
1. Remove blender motor base, blender jar, and lid from packaging.
2. Unwind the power cord.
3. Check for any packing material that may have blocked ventilation holes on the
underside of the blender motor base.
4. Inspect all items to ensure no damage occurred during shipment.
5. If any damage has occurred, contact your Blendtec service agent immediately.
2.2 RECORDING YOUR SERIAL NUMBER AND DATE OF PURCHASE
Record your blender motor serial number and date of purchase in the space below.
You will need these when contacting Blendtec for service or questions.
Motor Serial #(Found on bottom of motor base):_________________________
Date of Purchase: ______________________________________________
Purchased From: _______________________________________________
2.3 REGISTRATION OF YOUR BLENDER
Register online at www.blendtec.com/registration
17
3 3