About The Button - Barco CLICK SHARE CS-100 User Manual

Bluetooth
Bluetooth functionality is currently not available and Bluetooth signal is disabled.
2.3

About the Button

Button functionality
A Button contains three main functional components.
1
Image 2-3
The Button
1 USB connector
2 Button
3 LED ring
Table 2-5
Handle the Button cable with care. Rough handling might cause defects.
USB connector
Using the USB connector the Button can be plugged into a laptop (for sharing your screen) or in the Base Unit (for pairing the Button
to the Unit or updating its software).
Button
Click the Button to display the content of the laptop's screen on the meeting room display. Clicking the Button during the meeting
will toggle the sharing of the screen.
LED ring
The LED ring indicates the current status of your CS-100.
LEDs behavior
white blinking
static white
static red
red blinking
off (no light)
R5900024 CLICKSHARE CS-100 19/03/2018
2 3
Explanation
• the Button is plugged in the laptop and initializing or waiting for the user
to start the ClickShare application.
• pairing/software update of the Button in the Base Unit is in progress.
• ClickShare is ready to start sharing your screen.
• pairing is done. You can now unplug the Button from the Base Unit.
• sharing your screen with the display.
• pairing and software update is done. You can now unplug the Button
from the Base Unit.
• an error occurred.
• the Button is not or not properly inserted into the USB port.
• the Button might be defective.
• the USB port or computer might be defective.
2. Introduction to CS-100
7