About The Button - Barco R9861510EU User Manual

Introduction to CS-100, CS-100 HUDDLE
LEDs behavior
red blinking
dark
Standby button
The button at the front of the Base Unit has a standby function once the Base unit is powered.
• When the system is in normal operational mode, a push makes the system goes into a pre-defined standby
mode.
• When the system is in standby, a push triggers the system to start up and to go into normal operational
mode.
Bluetooth
Bluetooth functionality is currently not available and Bluetooth signal is disabled.

2.3 About the Button

Optional for CS-100 HUDDLE.
Button
A Button toggles the sharing of the individual PC or MAC screen on the meeting screen.
Button layout
A Button consists of three main components.
1
Image 2-3: Button layout
1 USB connector
2 Button
3 LED ring
USB connector
Using the USB connector the Button can be plugged into a laptop (for sharing your screen) or the Base Unit
(for pairing the Button to the Base Unit or updating its software). Button R9861500D1 has a USB Type-A
connector, Button R9861500D1C has a USB Type-C
laptop or on the Base Unit a convertor must be use.
Button
Click the Button to display the content of the laptop's screen on the meeting room display. Clicking the Button
during the meeting will toggle the sharing of the screen.
26 R5900024 /09 ClickShare CS-100 series
Explanation
• an error occurred
• deep standby/off
2 3
TM connector. Depending on the type of USB port on your