Download
Share
Print this page
Konica Minolta bizhub PRO 1100e Quick Manual
  1. Manuals
  2. Brands
  3. Konica Minolta Manuals
  4. Printer
  5. bizhub PRO 1100e
  6. Quick manual
Konica Minolta bizhub PRO 1100e Quick Manual

Konica Minolta bizhub PRO 1100e Quick Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
bizhub PRO 1100e
QUICK GUIDE

Advertisement

loading
Need help?

Need help?

Do you have a question about the bizhub PRO 1100e and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Konica Minolta bizhub PRO 1100e

Summary of Contents for Konica Minolta bizhub PRO 1100e

  • Page 1 PRO 1100e QUICK GUIDE...

  • Page 3: Table Of Contents

    Step 2: Load paper into a tray ......................3-3 3.1.3 Step 3: Configure information of the paper loaded into a tray in this machine ........3-3 3.1.4 Step 4: Use the printer driver to print data ..................3-4 3.1.5 Step 5: Check the finishing .........................3-4 bizhub PRO 1100e Contents-1...
  • Page 4 Zoom and Image Shift Adjustment ....................6-22 Image Quality Adjustment......................6-26 6.2.1 Image Quality adjustment .........................6-26 6.2.2 Adjusting a tone curve using Color Centro ..................6-26 Adjusting the Finisher........................6-27 6.3.1 Opening the screen to be adjusted....................6-27 Adjustable settings........................... 6-28 Contents-2 bizhub PRO 1100e...
  • Page 5 Removable Hard Disk Kit RH-101 ....................8-22 HDD Inner Case Kit HD-523 ......................8-22 Authentication Unit AU-201 ......................8-22 Authentication Unit AU-201S......................8-22 Weight for each size ........................8-23 Weight for each size......................... 8-23 Maximum paper size and printing area ..................8-24 bizhub PRO 1100e Contents-3...
  • Page 6 Contents-4 bizhub PRO 1100e...

  • Page 7: Introduction

    Introduction...

  • Page 9: Intended Use Of This Machine

    Maintenance intervals have been exceeded, Mechanical or electrical functions do not work as they should. 1.1.3 Exclusion of liability The manufacturer of the system assumes no liability for damages if the system was operated under imper- missible conditions. bizhub PRO 1100e...

  • Page 10: Target Groups

    The user's guides are intended for the following users of the system: Operator: Person who has been trained by Konica Minolta or authorized partner to operate the system for its intended use as well as manage consumables, and perform the maintenance and troubleshooting described in user's guides.

  • Page 11: Configuration And Usage Of This Guide

    Note that some of the functions may not work normally depending on your system environment. Please be forewarned. Problems may be able to be solved by using the latest Web browser. Display resolution 1,024 e 768 pixels or more bizhub PRO 1100e...

  • Page 12: Conventions Used In This Guide

    This guide describes product names and system configurations as follows. Product name Conventions used in this guide bizhub PRO 1100e This machine: Indicates the entire system including options and functions. The main body: Indicates the main unit that provides print functions in this machine.

  • Page 13: Make A Note About This Machine Information

    Multi Bypass Tray Unit MB-507 Large Capacity Unit LU-411 Post Inserter PI-502 Large Capacity Unit LU-412 Electronic optional devices HDD Inner-case Kit HD-523 Authentication Unit AU-201 Removable Hard Disk Kit RH-101 Authentication Unit AU-201S Status Indicator Light MK-744 bizhub PRO 1100e...

  • Page 14: Checking Network Information

    To check network information, the administrator privilege may be required. Contact your machine ad- ministrator. NOTICE Some notes may include confidential information. Handle this guide with great care. In particular, do not enter information such as the password. Item Entry field Example: JSP port number Example: 30081 bizhub PRO 1100e...

  • Page 15: Before Getting Started

    Before Getting Started...

  • Page 17: Turning The Power On/Off

    The default screen can be selected from Utili- ty/Counter. For details, refer to the [HTML Us- er's Guide]. When [Ready to print] is displayed on the [MA- CHINE] screen, you can use this machine. bizhub PRO 1100e...

  • Page 18: Turning The Power Off

    When turning the main power switch off then on, be sure to wait for 10 seconds or longer before turning the main power switch on again. If the main power switch is turned on again within 10 seconds, the machine may not function normally. bizhub PRO 1100e...

  • Page 19: Power-Saving Function

    When the sub power switch is turned off, the main power can be turned off automatically if the main body has completely cooled down. Weekly Timer Automatically turns the power of this machine on or off based on the specified time or day of the week. bizhub PRO 1100e...
  • Page 20 For information about the default administrator password, refer to page 7-17. NOTICE If this machine is turned off because the Weekly Timer has started, job data is not received even if it is sent. While this machine can be used normally, send job data again. bizhub PRO 1100e...

  • Page 21: Available Operations In This Machine

    You can configure a layout or finish setting by implementing a simple action when printing data. Copy functions You can specify conditions such as the original scan setting, paper size, or the finish setting to copy data. Using the ADF allows you to scan more original pages in a short time period. bizhub PRO 1100e...

  • Page 22: Scan Functions

    PageScope Web Connection is a device control utility program provided by the HTTP server built in the ma- chine. If you access this machine via the network using the computer's Web browser, you can check the machine status or configure various settings from a remote location using PageScope Web Connection. bizhub PRO 1100e...

  • Page 23: Application Functions

    Using this function, you can monitor a print, copy, or scan job, operate and edit jobs temporarily saved on this machine, and edit pages. In addition, you can acquire device information such as printer status, consum- able information, or tray information to check the status of this machine through your computer. bizhub PRO 1100e...
  • Page 24 Available Operations in this Machine 2-10 bizhub PRO 1100e...

  • Page 25: Let's Make Prints

    Let's Make Prints...

  • Page 27: Printing Flow

    To load paper into Paper Feeder Unit: Refer to page 5-4. 3.1.3 Step 3: Configure information of the paper loaded into a tray in this machine Specify the type, size, weight, and other values of paper. For details, refer to page 5-7. bizhub PRO 1100e...

  • Page 28: Step 4: Use The Printer Driver To Print Data

    Step 5: Check the finishing Check the image quality reproducibility, printing position misalignment, fold or staple position, and other items after printing data. For information about finishing checkpoints and adjustment proce- dures, refer to the [HTML User's Guide]. bizhub PRO 1100e...

  • Page 29: Installing Software

    Installing Software...

  • Page 31: Installing The Printer Driver

    This printer driver has the same operability that the printer drivers for office-use MFPs have. Use this printer driver if you cannot print correctly using the PS Plug-in driver. However, this printer driver is compatible only with Windows, not the Mac OS. bizhub PRO 1100e...

  • Page 32: In A Windows Environment

    % If the required printer name cannot be found, click [Have Disk], then directly specify the [Setup.inf] file. Click [Finish]. % If the [Windows Security] window is displayed, click [Install this driver software anyway]. Then, configure the default setting for the printer driver. For details, refer to page 4-5. bizhub PRO 1100e...

  • Page 33: Default Setting

    % Select a folder according to the printer driver, operating system, and language to be used. Copy the [bizhub PRO 1100PSxx.pkg] file matching the model name to the desktop, then double-click % "xx" indicates the version of the operating system. The installer starts. bizhub PRO 1100e...

  • Page 34: Default Setting

    Specify the Bonjour-connected printer to be added in the [Name] list. % Specifying a printer displays the appropriate printer driver in the [Use] field. If the printer driver is not displayed correctly, select [Select Printer Software], then directly specify [KONICA MINOLTA 1100PS].

  • Page 35: Installing Applications

    The memory must have a sufficient free space to support the operating sys- tem and required applications. 1,024 e 768 pixels or more Display Drive DVD-ROM drive Network environment The TCP/IP protocol setting must be configured correctly. bizhub PRO 1100e...

  • Page 36: Color Centro Setup

    This function is not available on this machine. [Alternative Color Management] This function is not available on this machine. [Profile Management] This function is not available on this machine. Reference For details, refer to the [HTML User's Guide]. bizhub PRO 1100e...

  • Page 37: Installation

    The JSP setting is a setting that relates to a connection with a Java application server. For information about the default administrator password, refer to page 7-17. Open the Start menu, and then click [All Programs] - [KONICA MINOLTA] - [Color Centro] - [KONICA MINOLTA Color Centro].

  • Page 38: Job Centro Setup

    Checking device information In the left-hand pane, the device information such as the status of the machine, the consumables, and the tray information are displayed. You can easily check the status of this machine from a remote location. bizhub PRO 1100e 4-10...

  • Page 39: Installation

    The JSP setting is a setting that relates to a connection with a Java application server. For information about the default administrator password, refer to page 7-17. Open the Start menu, and then click [All Programs] - [KONICA MINOLTA] - [Job Centro 2.0] - [KONICA MINOLTA Job Centro 2.0].
  • Page 40 Installing Applications bizhub PRO 1100e 4-12...

  • Page 41: Basic Operations

    Basic Operations...

  • Page 43: Loading Paper

    Open the feed roller. Slide the rear guide plate to any position. Place paper with the print side facing down. NOTICE Do not load paper over the limit level indicated on the side guide plate of the tray. bizhub PRO 1100e...
  • Page 44 Open the feed roller. % To load a different size of paper, proceed to step 3. % To load paper that is the same size as the paper al- ready loaded, proceed to step 6. bizhub PRO 1100e...
  • Page 45 Paper size indicator b: Side guide lock release lever NOTICE Load paper with the print side facing up. Turn the side guide lock knobs (4 locations) of the side guide plates clockwise to fix them. bizhub PRO 1100e...
  • Page 46 [MA- CHINE] or [COPY] screen. NOTICE Carefully close the tray. Otherwise, the machine may be subjected to an unexpected impact due to the tray or paper weight, which may lead to a machine error. bizhub PRO 1100e...

  • Page 47: Paper Setting

    Press [Paper Setting] on the [MACHINE] screen. % You can also press [Paper Setting] on the [COPY] screen to specify the required size. Select the tray with paper loaded, then press [Change Set]. Press [Paper Type] to select the desired paper type. bizhub PRO 1100e...
  • Page 48 Paper Setting Press [Paper Size]. Select one of the options under [Size Setting] to fit the paper loaded into the tray. bizhub PRO 1100e...
  • Page 49 [Detect Size Setting]. % [Custom]: Specify the numeric value for items (1) and (2). % You can name and register the size specified in [Size Registration]. % The registered size can be recalled by selecting [Size Recall]. bizhub PRO 1100e...
  • Page 50 If you select [Detect Size Setting] in [Standard], press [OK]. This returns to the [Size Setting] screen. % This step is not required if you select [Cus- tom] or [Tab Paper]. Press [OK]. This returns to the [Change Individual Set] screen. 5-10 bizhub PRO 1100e...
  • Page 51 For details about setting items, refer to the [HTML User's Guide]. To register paper conditions in a paper profile, press [Register]. For details about how to register a pa- per profile, refer to the [HTML User's Guide]. bizhub PRO 1100e 5-11...

  • Page 52: Printer Driver Setting

    Default] to update information. If [Stochastic] is selected, the same setting is applied to [Image] and [Text/Graphics]. Reference The assignment of [Fixed Screen] can be set using [Custom Screen]. For details, refer to the [HTML User's Guide]. 5-12 bizhub PRO 1100e...

  • Page 53: [Screening]: Custom Screen Setting

    [Screen Angle] allows you to set the vertical axis and screen angle. For black-and-white printing, set the angle to 45° for general use. bizhub PRO 1100e 5-13...

  • Page 54: [Tone Curve]: Tone Curve Setting

    To set the text and graphic density to the maximum level you can set on this machine, select the [Keep 100% Density for Text/Graphics] check box regardless of the tone curve setting. Reference Tone curves can be managed using [Tone Curve Adjustment] of Color Centro. For details, refer to page 6-26. 5-14 bizhub PRO 1100e...

  • Page 55: Maintaining The Finishing Quality

    Maintaining the Finishing Quality...

  • Page 57: Both Sides Adjustment

    % Zoom and Image Shift Adjustment: the method used for fine adjustment after Scan Measurement Adjustment, Gap Adjustment or Chart Adjustment, or the method used when the amount of mis- alignment between both sides is figured out (page 6-22). bizhub PRO 1100e...

  • Page 58: Making The Both Sides Adjustment For Each Tray

    The [Scan Meas.] adjustment is a simple method to adjust only the magnification ratio and image position of the back side. To adjust both front and back sides, perform the "Chart Adjustment" (page 6-16) or "Zoom and Image Shift Adjustment" (page 6-22). bizhub PRO 1100e...
  • Page 59 Both Sides Adjustment Press [Paper Setting] on the [MACHINE] screen. Select the tray with the target paper loaded, then press [Change Set]. Press [Both Sides Adj]. Check that [Scan Meas.] is displayed, then press [Output Background Sheet]. bizhub PRO 1100e...
  • Page 60 17 or larger paper. You can also change the print count, but only one sheet is needed. If the background sheet size is smaller than A3 or 11 17, the scan measurement may not be performed. Press [Exit Print Mode]. Press [1. Output Adjustment Chart]. bizhub PRO 1100e...
  • Page 61 Press Start on the control panel. Adjustment charts are printed on both sides of the paper in the tray you selected in Step 2. Press [Exit Print Mode]. Press [2. Scan Adjustment Chart]. The [Scan Adjustment Chart] screen is dis- played. bizhub PRO 1100e...
  • Page 62 % Place the black side of the background sheet facing down (facing the original glass), then set it flush with the vertical size guide and horizontal size guide as shown below. Exercise care to en- sure the previously set adjustment chart is not misaligned. front front bizhub PRO 1100e...
  • Page 63 % If you press [Return] on the Scan Adjustment Chart screen during scan measurement, a message is displayed to confirm whether to interrupt the scan measurement. To discard the previous meas- urement result, press [Yes]. Retry the scanning process from the first scan measurement. When continuing scan measurement, press [No]. bizhub PRO 1100e...
  • Page 64 (turned away from the original glass), with its bottom edge posi- tioned to the back side. When four times of scanning are completed, a dialog is displayed to calculate the adjustment value. 6-10 bizhub PRO 1100e...
  • Page 65 Press [Close] to exit the adjustment. Scan Measurement Adjustment is then com- pleted. % To register adjustment values in a paper profile, press [Register]. % For details about how to register a paper profile, refer to the [HTML User's Guide]. bizhub PRO 1100e 6-11...

  • Page 66: Gap Adjustment

    "Chart Adjustment" (page 6-16) or "Zoom and Image Shift Adjust- ment" (page 6-22). Press [Paper Setting] on the [MACHINE] screen. Select the tray with the target paper loaded, then press [Change Set]. Press [Both Sides Adj]. 6-12 bizhub PRO 1100e...
  • Page 67 [1] - [5] - [+/-] to enter "-1.5" as the adjustment value. Then, the blue line on the back side will be moved 1.5 mm toward the minus side. bizhub PRO 1100e 6-13...
  • Page 68 Press Start on the control panel. A test chart is printed out. Check a gap of the printing position refering the printed out chart. % Repeat steps 7 to 10 until all gaps between the front and back sides are cleared. 6-14 bizhub PRO 1100e...
  • Page 69 Press [Close] to exit the adjustment. Gap Adjustment is then completed. % To register adjustment values in a paper profile, press [Register]. % For details about how to register a paper profile, refer to the [HTML User's Guide]. bizhub PRO 1100e 6-15...

  • Page 70: Chart Adjustment

    Press [Paper Setting] on the [MACHINE] screen. Select the tray with the target paper loaded, then press [Change Set]. Press [Both Sides Adj]. 6-16 bizhub PRO 1100e...
  • Page 71 Both Sides Adjustment Select [Front], then press [Chart Adjustment]. Press [Print Mode]. When the [PRINT MODE] screen is displayed, press Start on the control panel. A test chart is printed out. Press [Exit Print Mode]. bizhub PRO 1100e 6-17...
  • Page 72 [ 6 ] [ 8 ] [ 3 ] [ 4 ] Press each point number, then enter the measured length using the keypad, [,], or [+] on the screen. % To reset a value, press [Clear]. 6-18 bizhub PRO 1100e...
  • Page 73 % In the next step, adjust the back side. Select [Back], then press [Chart Adjustment]. Press [Print Mode]. When the [PRINT MODE] screen is displayed, press Start on the control panel. A test chart is printed out. bizhub PRO 1100e 6-19...
  • Page 74 2.0 mm toward the minus side of the X direction and 1.5 mm toward the plus side of the Y direction. % Write down the measured values so that you do not forget them. 6-20 bizhub PRO 1100e...
  • Page 75 When entry processing is completed, press [Adjustment Start]. After the adjustment is completed, press [OK]. % To finely adjust the adjustment value, con- tinuously proceed to step 4 in "Zoom and Image Shift Adjustment" (page 6-22). bizhub PRO 1100e 6-21...

  • Page 76: Zoom And Image Shift Adjustment

    Scan Meas. adjustment, Gap adjustment or Chart Adjust- ment, or when you have a result of the 2-sided printing at hand. Press [Paper Setting] on the [MACHINE] screen. Select the tray with the target paper loaded, then press [Change Set]. 6-22 bizhub PRO 1100e...
  • Page 77 The adjustment value changes 0.1 mm on a 1-step basis. Adjustment range: [Up/Down] / [Right/Left] -10.0 to +10.0 % To switch the positive mark (+) and negative mark (-), press [+/-]. % To reset a value, press [Clear]. bizhub PRO 1100e 6-23...
  • Page 78 [+0.5 mm]. % Next, press [Right/Left], then press [3] and [+/-] in sequence to set the adjustment value to [-0.3 mm]. The image on the back side shifts 0.5 mm up- ward and 0.3 mm leftward. 6-24 bizhub PRO 1100e...
  • Page 79 If printing positions are misaligned between the front and back sides even after the Both Sides Adjustment has been carried out several times, readjust the reference position on the print side. For details about the adjustment procedure, refer to the [HTML User's Guide]. bizhub PRO 1100e 6-25...

  • Page 80: Image Quality Adjustment

    Enter the name of the adjusted tone curve. In [Destination Folder], select [Controller], then click [Save]. If [Controller] is selected, data is saved in the image controller of this machine. When the Save Complete message is displayed, click [OK]. In the [File] menu, select [Close] to close the screen. 6-26 bizhub PRO 1100e...

  • Page 81: Adjusting The Finisher

    When the finisher or Z-folding unit is installed on this machine, you can finely adjust its functions such as a folding or stapling position. Reference For details about how to adjust the finisher, refer to the [HTML User's Guide]. Press [Adjustment] on the [MACHINE] screen. Press [Finisher Adjustment]. bizhub PRO 1100e 6-27...

  • Page 82: Adjustable Settings

    For details about the setting procedure, refer to the [HTML User's Guide]. Setting item Description [Staple Finisher Adjustment] Adjusts stapler operations such as staple positioning. [Z-Folding Unit Adjustment] Adjusts Z-folding unit operations such as a punching or fold- ing position. 6-28 bizhub PRO 1100e...

  • Page 83: Troubleshooting

    Troubleshooting...

  • Page 85: Replenish And Replace Consumables

    The toner storage contains extra toner to prevent printing from being stopped during job processing when the toner bottle becomes empty. When the toner storage also becomes empty, the message [No toner / Please add toner] is displayed. Follow the below steps to replace the toner bottle. bizhub PRO 1100e...
  • Page 86 % The number on the right-hand side of the help message indicates a replacement procedure. To dis- play the next step, press [,]. % Attach the cap of a new toner bottle to the used toner bottle, then place it into the package. For the subsequent treatment, contact your service representative. bizhub PRO 1100e...

  • Page 87: Replenishing Staple Cartridge Supply

    Help on the control panel to display the help message. % Press the row that is highlighted in yellow in the [Consumable and Scrap Indicators] area on the touch panel to directly open the screen shown in step 3. Press [Consumable/Scrap]. bizhub PRO 1100e...

  • Page 88: Replacing A Waste Toner Box

    If the waste toner box becomes full of waste toner, the message [Waste toner box is full / Please replace the box] is displayed on the [MACHINE] screen. Then, the [Waste Toner Box] indicator in the [Consumable and Scrap Indicators] area changes to yellow. bizhub PRO 1100e...
  • Page 89 Press the [Waste Toner] tab, then follow the on-screen instructions to replace the waste toner box. % The number on the right-hand side of the help message indicates a replacement procedure. To dis- play the next step, press [,]. bizhub PRO 1100e...

  • Page 90: Clearing Paper Jams

    Tips Pressing [Close] changes to the [MACHINE] screen. Even while the [MACHINE] screen is being dis- played, a paper jam position is indicated by (red circle). Pressing [Confirm Details] changes to the [JAM Position] screen. bizhub PRO 1100e...

  • Page 91: Illustration Screen For Jam Handling

    Pressing [Next] can check the next step. Pressing [JAM Position] returns to the [JAM Po- sition] screen. Follow the guidance to remove jammed paper. Pressing [Next] can check the next step. Pressing [Previous] can check the previous step. bizhub PRO 1100e...
  • Page 92 Open and close the door of the part indicated by the number on the touch panel again. This operation may clear the message. If the paper jam message still has not been cleared after checking the above, contact your service rep- resentative. 7-10 bizhub PRO 1100e...

  • Page 93: If The Specified Paper Is Not Found

    To address this problem, load the specified paper into a tray, or you can forcibly print on the currently loaded paper of a different size. Replacing with the specified paper Press [Confirm Details] on the [MACHINE] screen. Select a tray to replace paper into, then press [Change Setting]. Press [Change Setting]. bizhub PRO 1100e 7-11...
  • Page 94 If the Specified Paper is not Found Replace paper into the tray, then press [OK]. Press Start on the control panel. Printing starts using the selected tray. 7-12 bizhub PRO 1100e...

  • Page 95: Forcibly Printing Using The Loaded Paper

    Forcibly printing using the loaded paper Press [Confirm Details] on the [MACHINE] screen. Select a tray with print paper loaded, then press [Forced Output]. Press Start on the control panel. Printing starts using the selected tray. bizhub PRO 1100e 7-13...

  • Page 96: Cannot Send Data

    % Lower the data resolution. Note that the image quality may be degraded. For details, refer to the [HTML User's Guide]. % Reduce the number of pages. Divide the originals, or remove pages unnecessary to scan. 7-14 bizhub PRO 1100e...

  • Page 97: When Gray Tones Did Not Come Out As Expected

    For details, refer to page 5-12. 7.5.2 Adjusting the tone curve by Color Centro Using [Tone Curve Adjustment] of Color Centro allows you to adjust the brightness and contrast of the entire image. Reference For details, refer to page 6-26. bizhub PRO 1100e 7-15...

  • Page 98: Image Position Adjustment

    Fusing Unit. In this case, adjust the image position (Both Sides Adjustment) again. Reference For details, refer to page 6-3. 7-16 bizhub PRO 1100e...

  • Page 99: If You Forget The Administrator Password

    If you forget the administrator password If you forget the administrator password The administrator password is set to "00000000" by factory default. If the administrator password is changed, contact your service representative. bizhub PRO 1100e 7-17...
  • Page 100 If you forget the administrator password 7-18 bizhub PRO 1100e...

  • Page 101: Appendix

    Appendix...

  • Page 103: Good Use Of The [Html User's Guide]

    These contents are included in each of the [Select from output results], [Adjust the output result], and [Utilize useful functions] on the top page (Home). They are always helpful for you. bizhub PRO 1100e...

  • Page 104: Name Of Each Component

    Waste toner box replacement Opens to allow replacement of the waste toner box. door Left side door Opens together with the front door to allow removal of mishandled paper or to turn off/on the main power switch. bizhub PRO 1100e...
  • Page 105 Connected with an Ethernet cable to operate the machine, 100Base-T, 1000Base-T) or to use the machine as a network printer/scanner. Power cord Supplies the main body with electric power. Dehumidifier heater switch Turns on/off the dehumidifier heater of the main body. bizhub PRO 1100e...

  • Page 106: Internal Components

    Drum unit Forms the image. Fixing unit Fuses toner onto paper. Side guide plate Aligned to the edges of loaded paper. Feed roller Feeds paper sheet by sheet to the printing unit. bizhub PRO 1100e...
  • Page 107 DO NOT pull out the toner bottle other than the time to exchange for running out of toner. If you pull out the toner bottle in which the toner remains, an area nearby may become dirty with toner. bizhub PRO 1100e...

  • Page 108: Control Panel Layout

    Used to suspend the operation when user authentication or account track function is activated and an authenticated user has used the machine. The screen for user authenti- cation/account track is displayed to allow the machine op- eration only when the next user is authenticated. bizhub PRO 1100e...
  • Page 109 Otherwise, an unexpected trouble may be caused. Write down the report code as stated on the second line of the message, turn off the sub power switch and main power switch in this order, then discon- nect from the power socket. Contact your service representative and inform them of the report code. bizhub PRO 1100e...

  • Page 110: Convenient Use Of Scan Function (Scan To Smb)

    The domain name and user name are displayed. The login user name is shown following "USER- NAME=." % The user name is required to specify a destination. Write down the user name so that you do not forget it. bizhub PRO 1100e 8-10...

  • Page 111: In A Macintosh Environment

    Reference To configure the network settings, select Utility/Counter - [Administrator Setting] - [Network Setting] - [NIC Setting]. For details, refer to the [HTML User's Guide]. For information about the default administrator password, refer to page 7-17. 8-11 bizhub PRO 1100e...

  • Page 112: Step 3: Prepare The Operating Environment For Smb Transmission

    In the [SCAN] screen of this machine, select an SMB destination, configure the scan conditions, then press Start. Reference You can specify conditions such as the image quality and scanning size. For details about scan conditions, refer to the [HTML User's Guide]. bizhub PRO 1100e 8-12...

  • Page 113: Major Specifications

    Inch area: A3 w, B4 w, A4 w/v, B5 w/v, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w /v, 5.5 e 8.5 w/v Capacity of document 300 sheets (64 or 80g/m paper) feeder 8-13 bizhub PRO 1100e...

  • Page 114: Feeding-Related Optional Devices

    Custom: Widthwise 250 mm to 314 mm, Lengthwise 176 mm to 229 mm / Widthwise 9.84" to 12.36", Lengthwise 6.93" to 9.02" Tab paper: A4T v, 8.5 e 11T v For details, refer to the [HTML User's Guide]. Paper tray capacity 4,500 sheets (80 g/m / 21 lb Bond) bizhub PRO 1100e 8-14...

  • Page 115: Large Capacity Unit Lu-412

    Widthwise 3.94" to 12.76", Lengthwise 5.83" to 19.02" Tab paper: A4T w/v, 8.5 e 11T w/v For details, refer to the [HTML User's Guide]. Paper tray capacity Bypass tray: 250 sheets (80 g/m / 21 lb Bond paper, height 27.5 mm / 1.08") 8-15 bizhub PRO 1100e...

  • Page 116: Post Inserter Pi-502

    * Foolscap refers to 8.5 e 13 w, 8.25 e 13 w, 8.12 e 13.25 w, and 8 e 13 w. Paper tray capacity 200 sheets (80 g/m / 21 lb Bond) or within 30 mm / 1.18" thick for the upper tray and lower tray each bizhub PRO 1100e 8-16...

  • Page 117: Output-Related Optional Devices

    • 16K w/v) 750 sheets : Extra-small sizes (A5 v, 5.5 e 8.5 w/v) • Secondary (sub) tray 300 sheets (80 g/m / 21 lb Bond) * 3,000 sheets when the Saddle Stitcher SD-510 is installed. 8-17 bizhub PRO 1100e...
  • Page 118 136 g/m to 162 / 37 lb Bond to 43 lb Bond 163 g/m to 216 / 44 lb Bond to 57 lb Bond 217 g/m to 256 / 58 lb Bond to 68 lb Bond bizhub PRO 1100e 8-18...
  • Page 119 216 g/m / 25 lb Bond to 57 lb Bond Paper weight of 217 g/m / 58 lb Bond or more is only available for cover sheets, and a sheet is counted as 5 sheets. 8-19 bizhub PRO 1100e...

  • Page 120: Multi Puncher Gp-501

    / Widthwise 3.74" to 12.99", Lengthwise 5.47" to 19.21" Punch mode A4 v, 8.5 e 11 v • * Foolscap refers to 8.5 e 13 w, 8.25 e 13 w, 8.12 e 13.25 w, or 8 e 13 w. bizhub PRO 1100e 8-20...

  • Page 121: Auto Ring Binder Gp-502

    A3 w, B4 w, 11 e 17 w, 8.5 e 14 w, 8K w Paper size Z-fold prohibited paper Paper inappropriate for folding, thin paper, thick paper, non-stiff paper (clas- sic white paper, recyconomic paper, X-ST paper, etc.) 8-21 bizhub PRO 1100e...

  • Page 122: Electronic Optional Devices

    User Authentication Unit for Non-Contact IC Card Reading Applied cards FeliCa, TypeA, FCF, FCF campus, SSFC Authentication Unit AU-201S Specifications Function User Authentication Unit for Non-Contact IC Card Reading Applied cards FeliCa, TypeA, FCF, FCF campus, SSFC bizhub PRO 1100e 8-22...

  • Page 123: Weight For Each Size

    245 to 300 / 134.5 to 165 203 to 249 210 to 258 146 to 179 66 to 81 301 to 350 / 165.5 to 192.5 249.5 to 290.5 258.5 to 301 179.5 to 209 82 to 93 8-23 bizhub PRO 1100e...

  • Page 124: Maximum Paper Size And Printing Area

    Main Body Tray: 463 mm / 18.23" Maximum printing area Crosswise direction: 313.9 mm / 12.36" Paper feed direction: 458 mm / 18.03" Tips For information about other paper trays, refer to the [HTML User's Guide]. bizhub PRO 1100e 8-24...