Omron NV3W-MR20L-V1 Operation Handbook page 29

Transferring the screen data
1. Set the transfer direction and data to transfer. Then transfer the data to the NV
1) Direction:
Select NV-Designer -> NV.
2. When the transfer is completed, the screen is shown on the NV.
 Use the shortcut Ctrl + T
Transfer is a frequently used operation. Use the shortcut for your convenience.
NV-series PT Simple Operation Handbook
2) Data to Transfer:
Select the All
Data Check Box.
Transfer Data After Clear NV Screen:
When this check box is not selected, the NV-
Designer will delete the screen data, but any
transferred data will not be deleted from the NV.
This method requires less transfer time.
When the message "Memory is full" is shown on
the screen, select this check box before
transferring the data.
3) Click the OK Button to
start transferring.
The Transfer Data Dialog
Box closes.
Click!!
29