Creating Switch Parts - Omron NV3W-MR20L-V1 Operation Handbook

Creating Switch Parts

This and the following few pages describe the procedure to create parts on
the screen, and confirming the NV-CP1E operations. Firstly, create a switch
part that turns ON and OFF the specified bit in the PLC.
Example of creating a switch part
CIO 10.00 in the PLC is turned ON when the switch is pressed and turned OFF when it is
released. (Momentary operation)
When pressed
Creating a switch part
Drag a switch part from the library and drop it at any desired space on the base screen.
Drag and drop!!
16
When released
Normally the OFF label is displayed. While the
switch is pressed, the ON label is displayed.
1) Use the Parts Library
Standard (NV3W-V1).
2) Use the part SW2.