Omron NV3W-MR20L-V1 Operation Handbook page 24

Creating a keyboard part
Drag a keyboard part from the library and drop it at any desired space on the keyboard screen.
Setting the function for the keyboard part
Double-click the keyboard part. Select the Basic Setup Tab. Make a necessary setting as
shown below. Note: This example uses the default setting.
Click the OK Button to close the dialog box.
Click!!
24
Drag and drop!!
Image:
The setting can be checked here.
Clicking a key will show the key setting dialog
box. You can change the setting for each key.
1) Use the Parts Library
Standard (NV3W-V1).
2) Click the Parts Group
Selection Button, and
then select Keyboard.
* Parts are displayed by
type.
3) Use the part DEC
Sign1.
Number of Keys:
Set the vertical (column) and
horizontal (row) number of keys.
Key Size:
Specify the size (height/width)
of keys.
Change the Keyboard:
Keyboard keys can be
selected among upper case,
lower case, and
alphanumerical + symbols.
When On is selected, specify
the keyboard number between
1 and 8.