Omron NV3W-MR20L-V1 Operation Handbook page 11

2. The PLC Settings Dialog Box appears .
Select Options – Transfer from PLC from the menu bar.
3. The PLC settings for the CP1E are uploaded to the PC. Make the setting on the Built-in
RS232C Port Tab Page as follows.
4. Select Options – Transfer to PLC from the menu bar.
Turning OFF and then ON the power of the CP1E
1. Turn OFF and then ON the power of the CP1E. The RS-232C serial port setting becomes
effective when the power is turned ON. This completes the CP1E communications setting.
NV-series PT Simple Operation Handbook
Click!!
Click!!
Click!!
* The second value from the
left of Format is the stop bit.
Be sure to set it to "1" when
the PLC is connected to an
NV.
* It is not selectable, when the PLC
operation mode is not in Program
Mode.
1) Do not select.
2) Click the Yes Button.
11