Omron NV3W-MR20L-V1 Operation Handbook page 18

2. Click the ON Button. Click the COPY from OFF Button. Then the setting for OFF is copied to
ON. The two have the same setting.
3. Change the character color for ON to white.
After setting, click the OK Button to close the setting dialog box. This completes creating a
switch part.
Confirming the part ON/OFF state by preview
Select the part. Change the status between OFF and ON by the Parts State Button on the
toolbar and check the displays.
OFF (Normal)
18
Click!!
1) Change the
character color
to white.
ON (When pressed)
1) ON/OFF:
Click the ON Button.
2) Click the COPY from
OFF Button.
Parts State
1) Select a part. (You
can select multiple
parts.)
2) Switch the ON/OFF
state by the Parts
State Button.