Troubleshooting; Error & Status Messages On The Control Panel - Ricoh Aficio CL3000 Maintenance Manual

Error & Status Messages on the Control
Panel
❖ ❖ ❖ ❖ Status Messages
Messages/Second messages
Calibrating...
Energy Save Mode
Hex Dump Mode
Offline
Please Wait
Processing...
Ready
Resetting Job...
Waiting...
Warming Up...
❖ ❖ ❖ ❖ Alert Messages
Messages/Second messages
Add Toner:
XXX

5. Troubleshooting

The printer is calibrating the color. Wait until "Ready" appears
on the panel display.
The printer is in Energy Saver (low-power) mode. No action is
required.
The printer receives data in hexadecimal numbers in Hex
Dump mode. Turn off the printer after printing, and then turn
it back on.
The printer is offline. Make the printer online by pressing the
{ { { { On Line} } } } key to start printing.
The printer is initializing the development unit or HDD. Wait
for a while.
This message may appear when printing with small size paper
continuously.
Wait for a while.
The printer is processing the print job. Wait for a while.
The default ready message. The printer is ready for use. No ac-
tion is required.
The printer is resetting the print job. Wait until "Ready" ap-
pears on the panel display.
The printer is waiting for the next data to print. Wait for a
while.
The printer is warming up and not ready. Wait until "Ready"
appears on the panel display.
Description
The printer is out of the indi-
cated toner(s).
XXX: Yellow/Magenta/Cy-
an/Black
Status
Solution
Replace with a new toner car-
tridge of the indicated
color(s). Even when yellow,
magenta or cyan toner runs
out, you can print in black and
white using the black toner.
See p.29 "Replacing Consum-
ables and Maintenance Kit".
53