Ricoh Aficio CL3000 Maintenance Manual page 59

Messages/Second messages
Hardware Problem
Bypass Tray
Hardware Problem
Color PCU
Hardware Problem
DIMM
Hardware Problem
Ethernet
Hardware Problem
HDD
Hardware Problem
IEEE1394
Hardware Problem
Wireless Board
Hardware Problem
NV-RAM
Error & Status Messages on the Control Panel
Description
An error has occurred in the
Bypass Tray.
An error has occurred in the
color PCU (Photo Conductor
Unit).
The printer detected a DIMM
sum value error.
The printer detected an Ether-
net error.
The printer detected a HDD
Board error.
The printer detected an
IEEE1394 Board error.
An error has occurred in the
optional 802.11b Interface
Unit or Bluetooth.
The printer detected a Memo-
ry Switch error.
Solution
Close the Bypass Tray and
then pull out Tray 1 partially.
Slide it completely into the
printer.
If the message appears yet,
turn the power switch off and
on.
If the message appears again,
contact your sales or service
representative.
Turn the power switch off and
on. If the message appears
again, contact your sales or
service representative.
Turn the power switch off and
on. If the message appears
again, contact your sales or
service representative.
Turn the power switch off and
on. If the message appears
again, contact your sales or
service representative.
Remove and reinstall the
Printer Hard Disk correctly. If
the message appears again,
contact your sales or service
representative.
See the Option Setup Guide.
Remove and reinstall
IEEE1394 Board correctly.
If the message appears again,
contact your sales or service
representative.
Remove and reinstall the IEEE
802.11b board or Bluetooth
board.
If the message appears again,
contact your sales or service
representative.
Remove and reinstall the op-
tional User Account Enhance
Unit.
If the message appears again,
contact your sales or service
representative.
5
55