Ricoh Aficio CL3000 Maintenance Manual page 54

Cleaning and Adjusting the Printer
❒ If the image density of the Im-
age Density Adjusting Card is
equal to the density shown
above the frame, select "-" for
the image density setting. If the
image density of the Image
Density Adjusting Card is equal
to the density shown below the
frame, select "+" for the image
density setting.
F F F F
Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to select
the color you want to adjust, and
then press the { { { { Enter #} } } } key.
4
Image Density:
Black
G G G G
Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to set the
image density value, and then
press the { { { { Enter #} } } } key.
Black:
(-10 +10)
Note
❒ You can adjust the image densi-
ty in 21 steps from -10 to +10. In-
creasing the value makes the
printouts darker and decreasing
the value makes the printouts
lighter.
❒ Pressing the { { { { U U U U } } } } or { { { { T T T T } } } } key
makes the value increase or de-
crease by one.
To adjust another color, repeat the
F
steps and
H H H H
Press the { { { { On Line} } } } key.
"Ready" appears on the panel dis-
play.
Ready
50
0
G
.